Reed Vavles.

[Jammy-G]

Quick question - Are reed valves made for individual bikes or are there standard blocks you can buy?

Cheers.
____________________
RooRoo: just like the time i stuck my finger up my arse with no lube at all and she didnt talk to me for hours

[alains]

you can buy separatly , but if you are going to change them , i will recommand to change all the bits and have a good look on the cables . however goto https://www.nsr125.com/schem.htm and you will see the details
____________________
the worst day fishing is better than the best day working

[alains]

the bits to change are 2,3,4,16,17
____________________
the worst day fishing is better than the best day working

[alains]

i've just realised that you were asking about intake valves . these are different with all bikes , the best are carbon reed valves . you can see them at https://www.nsr125.com/schem.htm and click on "intake manifold" ; you can get reed at https://www.redracingparts.com
____________________
the worst day fishing is better than the best day working

[Jammy-G]

I have a RXS100, not a NSR125. I thought reed blocks cost about a tenner, they are listed for nearly 60 quid
____________________
RooRoo: just like the time i stuck my finger up my arse with no lube at all and she didnt talk to me for hours

[alains]

depense on what you need and if money is a problem , but if you put one of these you will gain smoothness and power
____________________
the worst day fishing is better than the best day working