Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


nsr125 2002 foxeye rebuild

Reply to topic
Bike Chat Forums Index -> Show & Tell
View previous topic : View next topic  
Author Message

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 22:09 - 18 Apr 2017    Post subject: nsr125 2002 foxeye rebuild Reply with quote

Hello guys n gals
Im new here so firstly.. hiya Very Happy
Ive just bought my first road bike project which is a 2002 nsr 125 foxeye.
Previous owner had bought it for a donnor bike for his so has no fairings. Lights and a pretty shagged loom as well as having no forks or wheels
Basically the frame. Subframe. Swingarm. Tank. And engine (which previous owner told me the barrel was worn but i can only see a small nick on exhaust port bridge and some scaring the bottom end seems fine theres a litle sqeak when you first turn it from waterpump side but conrod has no play up dwn or side to side.
First up iI have been sourcing parts and will soon have loom complete with cdi servo and power valve (c1626) which I belive is the unrestricted cdi
Also I have sourced the forks and rims along with a full fairing set which need minor work and a repray but im redoing the whole bike from the floor up anyhow.
Price so far isnt bad as I paid £150 for the project
Wheels, cdi, servo and powervalve of ebay £240
Forks, headlight, loom £200
Full fairings £205
795 and its basically a complete bike plus what its gunna cost to rebuild and paint up nice (thinking black and yellow) probably gunna end up around the 1000 mark and as Im planning never to sell it,
Not too bad in my own eyes Rolling Eyes
Anyways ill be updating and puting up as many photos as possible as I go about buolding it back up as im sure most of you lot have seen plenty of these in bits before lol
Thanks for reading
Jordan
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile


Last edited by jordan2strokePope on 12:55 - 19 Apr 2017; edited 1 time in total
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 22:12 - 18 Apr 2017    Post subject: Reply with quote

Also if any one has any tips for the rebuild or do's n donts then id greatly appreciate it Thumbs Up
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MikeKP61
Two Stroke Sniffer



Joined: 19 Sep 2016
Karma :

PostPosted: 09:52 - 19 Apr 2017    Post subject: Reply with quote

Throw up some pics pal, have a look through my thread too. Loads of parts for them on DavidSilverSpares and Wemoto. You doing anything with the engine?
 Back to top
View user's profile Send private message You must be logged in to rate posts

MikeKP61
Two Stroke Sniffer



Joined: 19 Sep 2016
Karma :

PostPosted: 09:59 - 19 Apr 2017    Post subject: Reply with quote

I did a vlog of mine on YouTube if your bored 👍🏼
https://youtu.be/1bFIPOpQ6hs
 Back to top
View user's profile Send private message You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 13:01 - 19 Apr 2017    Post subject: Reply with quote

MikeKP61 wrote:
Throw up some pics pal, have a look through my thread too. Loads of parts for them on DavidSilverSpares and Wemoto. You doing anything with the engine?


Posted afew now.
Ill have a look mate also looking for ideas
And I was gunna fully rebuild but bottom end looks fairly new I mean iv not had it apart but crank has no play n big end looks new to my n theres no grinding noise when I turn the flywheel I am right in thinking I could just put a new topend n ride for a few thousand miles or so as long as I flush it out before put topend on or should I just rebuild
If you mean preformance mods im not sure wats possible pal so if you have any advice please go ahead lol
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 13:04 - 19 Apr 2017    Post subject: Reply with quote

MikeKP61 wrote:
I did a vlog of mine on YouTube if your bored 👍🏼
https://youtu.be/1bFIPOpQ6hs


Ill have a look after work cheers
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 22:04 - 19 Apr 2017    Post subject: Reply with quote

jordan2strokePope wrote:
MikeKP61 wrote:
I did a vlog of mine on YouTube if your bored 👍🏼
https://youtu.be/1bFIPOpQ6hs


Ill have a look after work cheers



Video not available bud
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MikeKP61
Two Stroke Sniffer



Joined: 19 Sep 2016
Karma :

PostPosted: 23:08 - 19 Apr 2017    Post subject: Reply with quote

My channel is mickayc on YouTube
 Back to top
View user's profile Send private message You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 12:27 - 20 Apr 2017    Post subject: Reply with quote

MikeKP61 wrote:
My channel is mickayc on YouTube


Iv actually seen your vids before lol good vids man
Howd you get on with panel repairs with firbe glass iv gt some filler for wen mine come im hoping there not too bad haha
I also noticed the photcopied manual and was wondering
If I could be cheeky n ask you to photocopy it again and send me it for a price obvzlol
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MikeKP61
Two Stroke Sniffer



Joined: 19 Sep 2016
Karma :

PostPosted: 10:48 - 21 Apr 2017    Post subject: Reply with quote

You can get the manual on this site, it's for the JC20 (the older model) but most of it is the same. Very handy, especially the start for routing cable diagrams, the loom is a mess. Glad someone watches them of it helps, also I made a mistake in the first video, the gear oil should be regular 10w40 not 2 stroke as we'll. Took me ages of sanding and prepping and plastic welding The fairings to get it right but well worth it, sad I have to sell it on Sad I'd also recommend reading "A 2Stroke Tuners Manual" very handy for an engine rebuild.

Best of look with the NSR, I'll stay posted Smile
 Back to top
View user's profile Send private message You must be logged in to rate posts

MikeKP61
Two Stroke Sniffer



Joined: 19 Sep 2016
Karma :

PostPosted: 10:56 - 21 Apr 2017    Post subject: Reply with quote

https://www.amrca.com/tech/tuners.pdf
 Back to top
View user's profile Send private message You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 09:49 - 25 Apr 2017    Post subject: Reply with quote

MikeKP61 wrote:
https://www.amrca.com/tech/tuners.pdf


Cheers man n ah no way any plans on ur next bike or you already got one
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jordan2stroke...
L Plate Warrior



Joined: 18 Apr 2017
Karma :

PostPosted: 10:14 - 25 Apr 2017    Post subject: Reply with quote

Just a quick update on my build my ecu servo and powervalve motor came yesterday so just got to get the power valve unit tht sits on the cylinder

Rims have also arrived n in better condition than I first thought so other than tyres new valves and new disks there good Smile

Complete new locks kit came today Smile genuine honda parts

Also going to be paying for forks n yokes. Front head light amd a new loom this friday after finding a nice person breaking a nsr on facebook she agreed to save allparts I needed that she still had and save them til I have the money so after ordering the above parts shes also got a full set of fairings waiting for me
Good to know genuine ppl still exist

Next couple of weeks ill be assemblying to check if anything else is missing from the bike and ordering whats needed and cleaning and repainting other parts

Iv also started stripping the bottom end ready for new bearings and seals

Currently im painting the suframe (was rusty as sh**e) rust treated and silver hammerite

Will keep posting for y'all
____________________
Best best way to find the answer .... is to simply ask
Gain knowledge then pass it on Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 6 years, 339 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Show & Tell All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.46 - MySQL Queries: 17 - Page Size: 83 Kb