Whats wrong with the Wiring Diagram???

[dan1234]

Hey Guys,

First time poster so bare with me...

I'm in the midst of my first project.

No major mods, but cleaning up a very unloved suzuki gn125

I'm at the stage of wiring and i can't for the life of me figure out what i've done wrong.

Heres the wiring diagram i've made and is how it sits on the bike at the moment. I'm just getting nothing when i push the starter button. i have lights, but thats it.

where a wire goes to an 'x' is just a wire going to nothing. ( i don't think this is an issue, but i could be very wrong)

Any help would really be appreciated

thanks

danny

[WD Forte]

I'd look at how you wired the starter relay.
Assuming as the lghts work, the supply on the orange wire also feeds the
kill switch and start button?
If so, check the starter relay function with flying leads to see if
A it works
B you're using the correct terminals

I cba to find a stock Suzuki GN125 wiring diagram right now, that's your job anyway
but any time I mod wiring, I find its usually best to study the original first
before 'improving' it.
____________________
bikers smell of wee

[sickpup]

Is there 12v on the grren wire exiting the starter switch when you push it?

Is there 12v exiting the starter relay both to earth and the starter motor when the starter button is pressed?

[Evil Hans]