Identify this bike?

[AdamEf]

Looking to identify the make / model of this bike...
https://image.ibb.co/cYAQf9/Screen_Shot_2018_08_26_at_17_13_19.png[/img]

[temeluchus]

Do you have a less potato pic? Where did you get the pic from?
____________________
Some shite cruiser. Now with guns and FREEDOM!

[AdamEf]

That's the best i've got .
It's a grab from a quick flyby caught on a Gopro.
Original was very dark so it's been lightened... and potatoed.

I realise it's a long shot.. guessing headlights aren't original. Guessed it was just a Bandit but rear grab rail doesn't match up.

[TheBikerStig]

possibly a slightly modified Suzuki. Could also be a Honda tho, no idea I'm just clutching at bags of ball bearings.
____________________
Some say that he is the sole survivor of Atlantis, and that he refused to speed test a new Hayabusa this morning simply because there was no milk for his Brexit. All we know is hes called TheBikerStig.

[Kawasaki Jimbo]

Some Bandits (later ones?) have a single grab rail across the top like that one. The fork guards look like ZX6/9 ones.

[chickenstrip]

The grab rail reminds me of that of an early SV650. But there's a fair bit non-standard going on there, whatever bike it is, as well as being a poor picture, so hard to say. Bandit was my first thought too, but I wouldn't lay any bets on either of those two.

On second thoughts, deffo not an SV650 frame.
____________________
Chickenystripgeezer's Biking Life (Latest update 19/10/18) Belgium, France, Italy, Austria tour 2016 Picos de Europa, Pyrenees and French Alps tour 2017 Scotland Trip 1, now with BONUS FEATURE edit, 5/10/19, on page 2 Scotland Trip 2 Luxembourg, Black Forest, Switzerland, Vosges Trip 2017
THERE'S MILLIONS OF CHICKENSTRIPS OUT THERE!

[AdamEf]

Definitely wasn't an SV650
I ride one.
It had the staight lower edge of tank with narrowish tubular straight section of frame that runs along the underside of the tank like a Bandit. The rest looked non-bandit though. Fairly sure it was an IL4 judging by the sound.

[temeluchus]

it looks like it could be several different bikes, the colour scheme if original reminds me of some 90s kwaks.
____________________
Some shite cruiser. Now with guns and FREEDOM!

[Kawasaki Jimbo]

[Kentol750]

Hornet 600? Grabrail looks right, and explains why rear looks squat.
____________________
Some bikes.

[c_dug]

If you're certain about the tubular frame then my guess would be a first gen fzs600 that's been involved in a big front end crash at some point.

I reckon the forks, or at the very least the front mudguard, is off of a thundercat.

The grab rail could easily be a rentec sport rack.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.

[Polarbear]

The frame looks to me like a Yamaha sports bike with the fairing removed.

A black version of this...

https://www.bing.com/th?id=OIP.iF-iq9Hlf75YYjgpI7yqMAHaFj&w=274&h=206&c=7&o=5&pid=1.7
____________________
Triumph Trophy Launch Edition

[c_dug]

I agree that it looks more like an aluminium chunky frame rather than tubular steel

If it is a tubular then this bit:

https://cdn.bcf.44bytes.net/files/img_20180827_100615.png

I suspect is the silver valve covers from the fzs engine. But it looks a bit high really.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.

[Irezumi aka Reuben]

Front mudguard looks like a ZX6R, J1 era.

Would assume rest of the bike is the same.
____________________
Pictorgraphicalfantastical

[chickenstrip]

[jjdugen]

ZX6 seconded.
____________________
The CBR900RR has been sold. Aprilia Falco worms its way into my heart.
Try Soi 23 on Amazon for a good read.... Self promotion? Moi?

[temeluchus]

[Kentol750]

Right, enough fannying around.....Op, where and when?
____________________
Some bikes.

[AdamEf]

Worked it out. It's a 2000 Bandit.
.
https://scontent-lht6-1.xx.fbcdn.net/v/t1.0-9/47010299_10214175089556064_1858795299485515776_n.jpg?_nc_cat=109&_nc_ht=scontent-lht6-1.xx&oh=884447ed7cb824e40e3b3d7c58b046a3&oe=5C6CBEB6

[MarJay]

No way, it's not a Bandit, it has a black Ally beam frame with ram air ducts. It's A mid to late 90's era Kwak sportsbike. Just look at the mudguard, tailpiece, tank, frame etc.

I think it's a G-J model ZX6R streetfighter with an aftermarket grab rail.

https://www.abload.de/img/ninjutsu019jrc8.jpg

Even the colours are right.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.

[pepperami]

[M.C]

Bit of a hijack here ...wassat:

https://i.pinimg.com/originals/d5/27/0a/d5270a0c26d609c54da0e25814d8b06d.jpg

[temeluchus]

could be an early mid 90s CBR600, the grab rail looks similar.
____________________
Some shite cruiser. Now with guns and FREEDOM!

[trevor saxe-coburg-gotha]

It's absolutely no doubt a ninja front end - zx6r or 9r. The mudguard lower cowls are very distinctive and unmistakable. I would put good money on it being a ninja frame as well. So far then, a fightered ninja, C or C2, very late '90s 9 or 6. But the subframe, dunno what's gone on there. That's a brain hurter. Probably as MarJay says though it's just the non-oem grab rail that's throwing the eye.
____________________
"Life is a sexually transmitted disease and the mortality rate is one hundred percent."

Mobylette Type 50 ---> Raleigh Grifter ---> Neval Minsk 125

[Ste]

Post the video so we can try to pick out some other details on the bike.

Lots of parts on the ZX6R from 98 to 02 (G and J models) were interchangeable with parts from the 99 to 01 ZX9R. (C and E models). [exact models of the ZX9R might be slightly different )