aprillia non runners

[aj2001]

hi guys, I recently bough two non running aprillia mojitos one is a 125 the other a 50cc they've sat for over a year before I got them the 125 has some unconnected wires where the colours don't match and im a bit over whelmed and don't know where to start. neither turn over or kick start I have 0ne got battery between the both and 2 spares kicking about that need charged any advice would be great!!
____________________
ajax

[-]

Take it to someone who has a basic understanding of 2 stroke motorcycles. Your post makes you sound like a complete amateur and the description you give, without taking the piss, will be out of your ability.

For a start, if they don't turn over, unless you've not checked the obvious, like it's not stick in gear, then they're seized. How many engines have you rebuilt?
____________________
TZR250 2MA road, TZR250 1KT road, TZR250 2MA race, TDR250, YZF-750R Boost colours.
Jaguar S Type 3.0 V6 Sport R, VW Transporter T5 GP LWB Shuttle 140ps DSG.

[jaffa90]

I would find wiring/colour diagrams for both bikes and engines before connecting any power source.

[aj2001]

I have a diagram but the previous owner has fiddled with them disconnecting and changing the colors taking ties off ect that's the part that's baffling me. I have previously rebuilt 2 of the 50 ccs im happy enough with my starting points
1- 50cc is a 2-stroke 125cc is a 4-stroke
2- neither have gears
3- I have cleaned carbs on both bikes, checked spark plugs(replaced both), checked battery's, flushed both tanks (one had a sticky float replaced that too just in case they got running)
I was looking to up the idle to see if that had any effect but decided against it for the time being. I had 3 of the 50ccs previously 1 was stripped down for spares, the other 2 used parts of the spare, was nothing major needed on one (carb cleaned, filters cleaned, changed spark plugs and put a tiny bit of fuel in there flushed tank out and charged the battery that one ran. the other was a case of stripping it down and completely cleaning everything replacing parts as I went and that's one got up and running too but due to other commitments I really don't want to have to completely strip it down again, if it come to it I will but I thought id check here for advice around it first.
____________________
ajax