TZR/TDR 250 Parts for sale

[David141]

Hi All,

Having a major clear out of my garage (15 years worth of spares), As i'm leaving the 2 stroke world behind. To save you from multiple posts I've listed everything in this one single post:
Bold Items are sold:
1* Standard Spare barrels – No powervalves, No pistons, Would ideally use a rebore but you may get away with just a hone. (1KT)
1* Standard Spare barrels – No powervalves, No pistons. -THESE BARRELS HAVE DAMAGE TO THE BORES AND THE SEALING FACE. – THESE WILL NEED REPAIRING AND A REBORE BEFORE USE. (1KT)
1* Standard gearbox, been stored for a long time (as I don’t use) – would have to check gearing I believe came from a 2ma.
1* Flywheel and stator (1KT/2MA)
Many Pistons, various different sizes decoked with rings, Usually only done about 6months running. – Usually Mitaka or Gen Yamaha, more details upon request. (1KT)
0.5 oversize New pistons, Mitaka with rings (1KT)

1* Bored & Flowed Race carbs 31.5mm (Based on TM28SS) - SOLD
1* Bellmouths Set for the TZR 250 Bored & Flowed 31.5mm carbs, with the air jet modification done as mentioned in the F3 KIT manual. – Also, with these I used a Flow commander, - which was basically like an adjustable jet – The needles mentioned in the F3 KIT manual are also included in this kit. (Based on TM28SS) - SOLD
1* Slightly bored carb I believe these are about 29.5. (Based on TM28SS)
1* Standard set of carbs (providing I can find the face's) (TM28SS) -SOLD
1* Set standard 2XT carbs (TM28SS - HOWEVER these have the Changeable power jet and air jet) -SOLD


1* TZR 250 Powervalve Control box (1KT/2MA MODEL)
1* TZR 250 CDI (1KT/2MA MODEL)
2* TDR 250 CDI’s

1* Mild Wide profile Tuned Engine – Without Electronics Willing to split for the right price. (Stan Stevens)
- SPLIT ONLY CRANK LEFT
1* Top End Tuned Engine – Without Electronics Willing to split for the right price. (Graham File)
Cases have been modified for use in a hovercraft so will be useless to you guys!

Thanks for reading!
David