Puch mv50 m2

[Mickrogers]

Hi all,
I need help with timing my mv50 m2.
I need to know how to set the stator plate after having to replace it, set up the points.
As usual, the Haynes Manuel is rather vague

[jaffa90]

Puch mv50 m2??
2stroke?
I would remove the spark plug and insert a wooden dowel in the hole and rotate the engine running wise and feel the piston when at the top of its stroke, then rotate backwards 12degrees (2minutes of a clock) and watch the points just open for a short while or close for a short while.

[steve the grease]

There are three Puch groups on Facebook - Puch mopeds, Tuning Puch mopeds and Puch mopeds for sale. Lots of information and helpful contributions Timing pops up every few days .
____________________
All the above is my personal opinion, you can see my lips move, but I'm talking out of my arse.
I've been riding, and fixing , bikes for 50 years, in that time the more I learn, the less I am absolutely sure of.....