Looking for advice on how to make my xj6n street fighter

[jackzR91]

Hi Guys,

I'm looking for advise on how I can make my xj6n look more streetfighter style,

I think I need new bars, grips as mine are worn and bar ends.

Does anyone have a recommends on bars and bar ends which will fit a yamaha xj6n 2009?


Thanks
Jack

[Nobby the Bastard]

[Polarbear]

As Nobby says, it's normally a bodge to get you back on the road. Even with an XJ you are going to lose copious wads of dosh doing that.

Sell your XJ and buy a crashed or track bike for pennies and try modifying that.
____________________
Triumph Trophy Launch Edition

[jackzR91]

Thanks for your reply,

Yes I have considering getting another bike but my bars are bent on this bike anyway so I will need to replace them either way but I'm not sure on the sizing or what will fit with the cabling.

Cheers

[Nobby the Bastard]

[WD Forte]

Ape hangers
____________________
bikers smell of wee

[MarJay]

A streetfighter is a sportsbike turned into a naked. Sounds like you already have a naked. Streetfighter style went out in the mid 2000s, so it won't be 'of the fashion' to put knuckeduster heel plates and skull headlights on your XJ.

Fix it up to standard.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.

[xX-Alex-Xx]

You'll have a hard time doing anything substantial with the tail by the look of the frame on them, but you could probably throw a set of R1 forks on there if you replace the triples too. Drill in some risers for straight bars and you're off to a good start..
____________________
DILLIGAF