Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Cable repair . Cool!

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 16:50 - 19 Oct 2021    Post subject: Cable repair . Cool! Reply with quote

I use cable repair kits or just go and buy a new cable, always have.

However when I was a teen just getting into bikes and didn’t have a lot of money, this video/knowledge would have been a very useful thing to know.
https://m.youtube.com/watch?v=Ysd8JkWclmc

I’m Sooo behind the times Doh! Doh! .

So simple , so obvious if you know.
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 18:44 - 19 Oct 2021    Post subject: Reply with quote

Points for the handy jig but I don't see any degreasing or flux used.
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 19:25 - 19 Oct 2021    Post subject: Reply with quote

WD Forte wrote:
Points for the handy jig but I don't see any degreasing or flux used.


I would do that on any soldering, it’s a given.
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :

PostPosted: 19:25 - 19 Oct 2021    Post subject: Reply with quote

I'd go with brass ends and silver solder for ultimate longevity.
____________________
Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 19:30 - 19 Oct 2021    Post subject: Reply with quote

Easy-X wrote:
I'd go with brass ends and silver solder for ultimate longevity.


Agreed, but sometimes you have to go with what you’ve got.

I might have to have a go at making one of those.
Shocked Shocked
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 00:03 - 20 Oct 2021    Post subject: Reply with quote

I'd recommend dipping the end of the cable in #3 bakers fluid before soldering. I'd also use 60:40 lead tin solder rather than pure lead.

Also easy to make a birdcage tool so the end looks like this:
https://lh3.googleusercontent.com/DS7pLWraMBdydcaUWliT1ZFmtTIE-Qi_Lc12iZAoPBidfiBdMfg2boK3lDjtqpCGhutaWY59bQ0MtUM48ZdnkUE-3Zqvaes-RwXkBkEgQtDhfYIoFyaWMN7-fqD3tz_a2xPKrrgSwA=w1139-h866-no

https://www.bikechatforums.com/viewtopic.php?t=329473
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 09:04 - 20 Oct 2021    Post subject: Reply with quote

Thank you Mr Stinky Thumbs Up , informative and helpful Thumbs Up
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fat Angry Scotsman
World Chat Champion



Joined: 12 Jan 2021
Karma :

PostPosted: 10:02 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

pepperami wrote:
I use cable repair kits or just go and buy a new cable, always have.

However when I was a teen just getting into bikes and didn’t have a lot of money, this video/knowledge would have been a very useful thing to know.
https://m.youtube.com/watch?v=Ysd8JkWclmc

I’m Sooo behind the times Doh! Doh! .

So simple , so obvious if you know.


I am in the just buy a new cable camp as well if I am honest Laughing
____________________
PRESENT: 2018 BMW S1000XR SE Sport.
PAST: 2009 Kawasaki ER-6F. 2021 Zontes ZT-125U.
 Back to top
View user's profile Send private message You must be logged in to rate posts

xX-Alex-Xx
World Chat Champion



Joined: 12 Sep 2019
Karma :

PostPosted: 10:14 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

Fat Angry Scotsman wrote:

I am in the just buy a new cable camp as well if I am honest Laughing


For the sake of 10 quid for a new cable, I'm there as well TBH.
____________________
DILLIGAF
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fat Angry Scotsman
World Chat Champion



Joined: 12 Jan 2021
Karma :

PostPosted: 10:16 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

xX-Alex-Xx wrote:
Fat Angry Scotsman wrote:

I am in the just buy a new cable camp as well if I am honest Laughing


For the sake of 10 quid for a new cable, I'm there as well TBH.


When I was a teenager I just didn't have enough random hardware, pedestal drill, bench vice, angle grinder and blow torch to do this unfortunately. Laughing
____________________
PRESENT: 2018 BMW S1000XR SE Sport.
PAST: 2009 Kawasaki ER-6F. 2021 Zontes ZT-125U.
 Back to top
View user's profile Send private message You must be logged in to rate posts

xX-Alex-Xx
World Chat Champion



Joined: 12 Sep 2019
Karma :

PostPosted: 10:29 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

Fat Angry Scotsman wrote:


When I was a teenager I just didn't have enough random hardware, pedestal drill, bench vice, angle grinder and blow torch to do this unfortunately. Laughing


I don't even have a garage Embarassed Laughing I'd look like a right twat with all that hardware sat outside on the driveway just to replace a cable.
____________________
DILLIGAF
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :

PostPosted: 10:47 - 20 Oct 2021    Post subject: Reply with quote

£10 for a cable sounds nice but not always an option for classic bikes. You're also in pickle if you need longer cables.
____________________
Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 12:56 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

Fat Angry Scotsman wrote:


When I was a teenager I just didn't have enough random hardware, pedestal drill, bench vice, angle grinder and blow torch to do this unfortunately. Laughing


Did you not improvise when you were a kid?
Most dads and grownups had a blowtorch in their garden shed.
I had an old set of mole grips, (my portable grippy vice thing)
Bit of old scrappy metal could be obtained from the local dump/tip.

I’m sure if I had of asked my dad to drill out a bolt for me and explained what I was doing, he would have helped .

All well and good buying a brand new cable, I do that myself.
What do you do on a late Sunday afternoon when you need the bike for Monday morning.
Or your bike is some strange and unusual bike with very few spares available out in bike-world.
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bhud
World Chat Champion



Joined: 11 Oct 2018
Karma :

PostPosted: 13:45 - 20 Oct 2021    Post subject: Reply with quote

For my latest project bike's bespoke throttle cable I used a screw-on cable end from one of those kits, and smothered it in silver solder by first dipping it in flux and then heating the end over the gas cooker, and then dabbing it with the silver solder strip. That's the nice thing about having a gas cooker. You can save the blowtorch for winter barbecues. Crude, but it works. I'm very impressed with the strength of silver solder.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fat Angry Scotsman
World Chat Champion



Joined: 12 Jan 2021
Karma :

PostPosted: 13:54 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

pepperami wrote:
Fat Angry Scotsman wrote:


When I was a teenager I just didn't have enough random hardware, pedestal drill, bench vice, angle grinder and blow torch to do this unfortunately. Laughing


Did you not improvise when you were a kid?
Most dads and grownups had a blowtorch in their garden shed.
I had an old set of mole grips, (my portable grippy vice thing)
Bit of old scrappy metal could be obtained from the local dump/tip.

I’m sure if I had of asked my dad to drill out a bolt for me and explained what I was doing, he would have helped .

All well and good buying a brand new cable, I do that myself.
What do you do on a late Sunday afternoon when you need the bike for Monday morning.
Or your bike is some strange and unusual bike with very few spares available out in bike-world.


Well my dad didn't have any of that shit. I don't know any relatives who have any of that either except maybe an angle grinder and mole grips. I would have had to have bought other things which totally negated the cheaper aspect of it.

I didn't have a motorbike when I was a teenager, but I did have a car and many times it was fucked and I just had to get about by public transport when it was out of action, if I had a bike it would have been the same.

Hell, I am a grown ass man now and I don't personally own any of the tools used in that video either (except for the hand tools). I have access to all of it at my work but I don't own any of it personally and thinking about my friends and peers I can't think of a single person who has a pedestal drill at home.

If you had the means to do it fair enough but I doubt a significant proportion of people would.
____________________
PRESENT: 2018 BMW S1000XR SE Sport.
PAST: 2009 Kawasaki ER-6F. 2021 Zontes ZT-125U.


Last edited by Fat Angry Scotsman on 13:57 - 20 Oct 2021; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

MCN
Super Spammer



Joined: 22 Jul 2015
Karma :

PostPosted: 13:57 - 20 Oct 2021    Post subject: Reply with quote

Plus 1 for bakers fluid.

And de-greasing the cable after splaying.

Common spelter end method.

https://youtu.be/0ET6eLcBk5c
____________________
Disclaimer: The comments above may be predicted text and not necessarily the opinion of MCN.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

pepperami
Super Spammer



Joined: 17 Jan 2010
Karma :

PostPosted: 17:24 - 20 Oct 2021    Post subject: Re: Cable repair . Cool! Reply with quote

Fat Angry Scotsman wrote:

Well my dad didn't have any of that shit. I don't know any relatives who have any of that either except maybe an angle grinder and mole grips. I would have had to have bought other things which totally negated the cheaper aspect of it.

Hell, I am a grown ass man now and I don't personally own any of the tools used in that video either (except for the hand tools). I have access to all of it at my work but I don't own any of it personally and thinking about my friends and peers I can't think of a single person who has a pedestal drill at home.

If you had the means to do it fair enough but I doubt a significant proportion of people would.


I think you’re missing the point here.
You don’t need an angle grinder to cut a groove in a bolt, a hacksaw and a file should be sufficient.
You don’t need a pillar drill to drill a hole in a bolt, with a bit of a steady hand and a bit of luck, an electric drill and a bench vice should see the job done.
No specialists tools and equipment used so far..
Blowtorches are not so expensive that the ordinary man can’t afford them.

My point being: it’s better to have the knowledge and abilities and not need them than being stumped because you don’t know how.

My bench vice = £3 at a car boot sale.
My bench = a chopped and hacked/ modified old dining table.
My blowtorch = I seem to remember paying £15
My electric drill = I was given that years ago and it’s still going.

All the things I’d need to do that cable fix.
And all the kit was already in my shed and gets used for other jobs.

As for a pillar drill? A really useful piece of kit .
https://www.screwfix.com/p/energer-enb672dbt-290mm-electric-pillar-drill-230-240v/1009j.
Not exactly going to break the bank.
Maybe it’s not industrial grade, but for DIY I’m sure it’ll be okay Thumbs Up
____________________
I am the sum total of my own existence, what went before makes me who I am now!
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 18:26 - 20 Oct 2021    Post subject: Reply with quote

Just for info, a good place for relatively inexpensive custom cables and cable making parts is carrotcycles.co.uk

I make a lot of custom cables for things like my big bullet where I have a honda C90 twistrip connected to an Amal carburettor.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 2 years, 159 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.09 Sec - Server Load: 0.29 - MySQL Queries: 17 - Page Size: 107.59 Kb