Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Stolen & recovered bike, need help identifying parts

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Oskardlu
L Plate Warrior



Joined: 16 Nov 2021
Karma :
PostPosted: 19:32 - 16 Nov 2021    Post subject: Stolen & recovered bike, need help identifying parts Reply with quote
I need some help identifying what parts I need to buy as my keeway tx125 2019 (WD19 BPE) was stolen and hot wired and they cut the connector.
I have attached a photo to help identify.

Thanks in advance
https://ibb.co/HFqhhBz
 Back to top
View user's profile Send private message You must be logged in to rate posts

Oskardlu
L Plate Warrior



Joined: 16 Nov 2021
Karma :
PostPosted: 19:33 - 16 Nov 2021    Post subject: Link to pic Reply with quote
https://ibb.co/HFqhhBz
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :
PostPosted: 19:37 - 16 Nov 2021    Post subject: Reply with quote
It appears that there's two wires on each side of that connector, please.confirm.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Oskardlu
L Plate Warrior



Joined: 16 Nov 2021
Karma :
PostPosted: 19:42 - 16 Nov 2021    Post subject: Reply with quote
Nobby the Bastard wrote:
It appears that there's two wires on each side of that connector, please.confirm.


Yes it there is only two, I am wondering if i can just buy the clip and crimp the cables back in place? Open to suggestions tho as I’m not experienced
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :
PostPosted: 19:51 - 16 Nov 2021    Post subject: Reply with quote
You could just connect the wires and wrap then with electrical tape to see if the bike works but.yes, suitable connectors are preferable.

Buy some chocolate block connectors.from your local DIY place or use crimped connectors.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Oskardlu
L Plate Warrior



Joined: 16 Nov 2021
Karma :
PostPosted: 20:02 - 16 Nov 2021    Post subject: Reply with quote
Nobby the Bastard wrote:
You could just connect the wires and wrap then with electrical tape to see if the bike works but.yes, suitable connectors are preferable.

Buy some chocolate block connectors.from your local DIY place or use crimped connectors.


How would I connect that to the metal prongs? As I think they cut the connector for it when I touched the cables to the prongs it started the bike then cut off when I stopped it.
See pic below zoomed in
https://ibb.co/yQ6KrBs
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :
PostPosted: 22:16 - 16 Nov 2021    Post subject: Reply with quote
As this is a cheap Chinese bike you don't need to do anything fancy. Get some of these:

https://www.ebay.co.uk/itm/284386654410

and buy/borrow a crimp tool. Cut off and replace the old plug, put a socket on the dangling wires and remember to match up the colours.
____________________
Royal Enfield Continental GT 535, Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 10:01 - 17 Nov 2021    Post subject: Reply with quote
Easy-X wrote:
As this is a cheap Chinese bike you don't need to do anything fancy. Get some of these:

https://www.ebay.co.uk/itm/284386654410



296 pieces - bargain!
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

steve the grease
Crazy Courier



Joined: 26 Jan 2018
Karma :
PostPosted: 15:42 - 17 Nov 2021    Post subject: Reply with quote
Easy-X wrote:
As this is a cheap Chinese bike you don't need to do anything fancy. Get some of these:

https://www.ebay.co.uk/itm/284386654410

and buy/borrow a crimp tool. Cut off and replace the old plug, put a socket on the dangling wires and remember to match up the colours.

Woah , thats getting a bit complicated isn't it. What about some simple crimping pliers : https://www.ebay.co.uk/itm/185078567914 and a few crimp connectors , order 2 pairs of red ones - only £1.59 https://www.ebay.co.uk/itm/264495178129 cut the old connectors off and put the connectors on so they join the wires like the green and black ones in the picture. Layout a fiver and you get a tool to keep....
____________________
All the above is my personal opinion, you can see my lips move, but I'm talking out of my arse.
I've been riding, and fixing , bikes for 50 years, in that time the more I learn, the less I am absolutely sure of.....

Last edited by steve the grease on 15:49 - 17 Nov 2021; edited 2 times in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

xX-Alex-Xx
World Chat Champion



Joined: 12 Sep 2019
Karma :
PostPosted: 15:45 - 17 Nov 2021    Post subject: Reply with quote
Shall we shorten those links?

https://www.ebay.co.uk/itm/185078567914

https://www.ebay.co.uk/itm/264495178129
____________________
DILLIGAF
 Back to top
View user's profile Send private message You must be logged in to rate posts

steve the grease
Crazy Courier



Joined: 26 Jan 2018
Karma :
PostPosted: 15:48 - 17 Nov 2021    Post subject: Reply with quote
xX-Alex-Xx wrote:
Shall we shorten those links?

https://www.ebay.co.uk/itm/185078567914

https://www.ebay.co.uk/itm/264495178129

Thanks you beat me to it.....
____________________
All the above is my personal opinion, you can see my lips move, but I'm talking out of my arse.
I've been riding, and fixing , bikes for 50 years, in that time the more I learn, the less I am absolutely sure of.....
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.
Red Rocket



Joined: 14 Feb 2008
Karma :
PostPosted: 18:32 - 17 Nov 2021    Post subject: Reply with quote
steve the grease wrote:
Easy-X wrote:
As this is a cheap Chinese bike you don't need to do anything fancy. Get some of these:

https://www.ebay.co.uk/itm/284386654410

and buy/borrow a crimp tool. Cut off and replace the old plug, put a socket on the dangling wires and remember to match up the colours.

Woah , thats getting a bit complicated isn't it. What about some simple crimping pliers : https://www.ebay.co.uk/itm/185078567914 and a few crimp connectors , order 2 pairs of red ones - only £1.59 https://www.ebay.co.uk/itm/264495178129 cut the old connectors off and put the connectors on so they join the wires like the green and black ones in the picture. Layout a fiver and you get a tool to keep....


That is so bodge though, at least the ones linked are presumably waterproof, unlikely to come undone etc. Just looks nicer than some bullets.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :
PostPosted: 18:36 - 17 Nov 2021    Post subject: Reply with quote
Lay out a fiver and a tool to throw in the bin after use when you realise just how shit it is.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 11:16 - 18 Nov 2021    Post subject: Reply with quote
Nobby the Bastard wrote:
Lay out a fiver and a tool to throw in the bin after use when you realise just how shit it is.


And then buy a decent ratchet crimp too for future use. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

xX-Alex-Xx
World Chat Champion



Joined: 12 Sep 2019
Karma :
PostPosted: 13:18 - 18 Nov 2021    Post subject: Reply with quote
Islander wrote:
Nobby the Bastard wrote:
Lay out a fiver and a tool to throw in the bin after use when you realise just how shit it is.


And then buy a decent ratchet crimp too for future use. Thumbs Up


Or learn how to solder.
____________________
DILLIGAF
 Back to top
View user's profile Send private message You must be logged in to rate posts

TravisBickle
World Chat Champion



Joined: 17 May 2019
Karma :
PostPosted: 01:01 - 19 Nov 2021    Post subject: Reply with quote
xX-Alex-Xx wrote:
Or learn how to solder.


Was gonna say this but the fact there's a plug there in the first place assumes it may need to be disconnected at some stage? I'd go with the waterproof plugs that Easy-X linked or something similar. If you're not confident to do it yourself any decent bike or car garage would do it for you for a minimal charge. Crimp connectors and chocolate blocks will oxidize and corrode after only one or two winters and you'll start to lose conductivity and have starting problems.
____________________
2024 BMW M1000XR
2021 Honda CMX500 Rebel S
2016 Triumph Tiger 1050 Sport
 Back to top
View user's profile Send private message You must be logged in to rate posts

slowasyoulike
Scooby Slapper



Joined: 17 May 2021
Karma :
PostPosted: 18:50 - 03 Dec 2021    Post subject: Reply with quote
steve the grease wrote:

Woah , thats getting a bit complicated isn't it. What about some simple crimping pliers : https://www.ebay.co.uk/itm/185078567914


Those are, IMHO, wank, and not worth even half the asking when you can have these for £11:

https://www.ebay.co.uk/itm/353176114215
 Back to top
View user's profile Send private message You must be logged in to rate posts

Skudd
Super Spammer



Joined: 01 Oct 2006
Karma :
PostPosted: 19:18 - 03 Dec 2021    Post subject: Reply with quote
TravisBickle wrote:


Was gonna say this but the fact there's a plug there in the first place assumes it may need to be disconnected at some stage? Crimp connectors and chocolate blocks will oxidize and corrode after only one or two winters and you'll start to lose conductivity and have starting problems.


I need to redo the Cagiva because of sodding bullet connectors.
____________________
Famous last words of Humpty Dumpty. " Stop pushing me "
Petty Anarchists look at "1984".............. The Visionary looks at "Animal Farm".
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 23:43 - 03 Dec 2021    Post subject: Reply with quote
xX-Alex-Xx wrote:
Islander wrote:


And then buy a decent ratchet crimp too for future use. Thumbs Up


Or learn how to solder.


Crimps are better where there's movement and flex. Soldering is good where there's no movement. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 23:45 - 03 Dec 2021    Post subject: Reply with quote
Skudd wrote:
TravisBickle wrote:


Was gonna say this but the fact there's a plug there in the first place assumes it may need to be disconnected at some stage? Crimp connectors and chocolate blocks will oxidize and corrode after only one or two winters and you'll start to lose conductivity and have starting problems.


I need to redo the Cagiva because of sodding bullet connectors.


There are bullet connectors and bullet connectors. I use the ones that have glue lined heat shrink sleeves - they're pretty weatherproof and reliable. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 4 years, 29 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.35 - MySQL Queries: 14 - Page Size: 107.8 Kb