Virago 535 1991..left peg bracket

[chaza]

Hi guys
I have a small issue.... I have this trike 535. The previous owner has screwed it up on various parts...the issue i have....does the left foot peg bracket assemby. Does it have a spacer at the rear by the gear change shaft.
My bracket doesnt seem to fit. It hits the gear box. So im unsure if he has removed something i dont have.

A pic would be nice.....
Cheers guys


Chaza

[stinkwheel]

https://www.cmsnl.com/yamaha-xv535-1991-3btf-europe-213bt-300e1_model37531/partslist/0036.html#.Y2f2oSXgrRY
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[chaza]

him there,, i have that diagram, the peg bracket is off the bike, so its hard to see if there should be a spacer or not. as i lay the part where it should go, there is some distance to the bracket from the bolt hole in the engine.
thats why i asked pics to show how it should be.


thanks for your input....


chaza

[stinkwheel]

That diagram shows you all the parts that should be there, in the order they should be in. Follow the line from part 32 to part 34.

If there's a bit along that line you don't have, you need it. If not, the problem isn't a missing bit.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[chaza]

cheers stinkwheel
i get what you are saying, but thats not what i see.
the bracket fits at the fron,,, comes along the gearbox.
at the point where it bolts on, as the diagram shows,, i have about 25,30mm gap, i am wondering if the parts for the stand has something to do with the gap.


chaza

[Zen Dog]

Post some pictures of what you've got and where you think it should go so we can see what you're talking about. It's just a lot easier.
____________________
Current - '94 VFR750FR (Dead), '00 VFR800FI, 2011 CBF125 Previous - '10 Street Triple R, '92 MZ ETZ301, '05 TTR250, NSR125R, KMX125, "Honda" Win (chinese copy of an old Honda design with a C90 engine)
My bike trip around S.E. Asia 2010/2011

[chaza]

hi guys
its all sorted.... i guess the space of abour 30mm was taken up by the centre stand or side stand, the bolt is 100mm bolt , it secured the gear change and foot peg rail at the rear just below the gear shaft.
it was difficult as i couldnt really see what was wrong.


thanks for all your comments

chaza