Honda Vision Starter relay

[Bleeter]

I have a Honda Vision 110 2019.
The bike struggles to start with ignition switch. When it eventually does start it runs fine. New battery installed. I suspect its the starter relay however I dont know which or where it is. There 2 in the fuse box, one small grey (4 pin) ,one larger black (5 pin). They both click on testing. The parts manual does not describe between the 2 relays. Maybe it is located somewhere else in the bike?
I'd appreciate some help identifying
Thanks

[jaffa90]

Google a starter relay switch for a pic, you should be able to check a relay switch with a screwdriver (google). Also check safety cut out switches like on side stand, brake switches. It may be a bad connection between the battery and the bike. A voltage reading at the starter motor may help when pressing the starter button.

[Bleeter]

[WD Forte]

Pretty sure that the Vision has an ACG
(combined starter and altermator)
so it may be a wee bit harder to debug than a conventional type as the ecu is involved as well
what mileage?

I used to have a manual/diagrams for the Vision but not sure I still have but will have a look later.
____________________
bikers smell of wee

[Bleeter]

Problem seems to have been solved.
After putting the relays back in the power box and giving the ground wire a fiddle, it now starts first time again. If the problem comes back there is a connection issue somewhere.
Duh