Help with Suzuki 400 Katana parts after an off

[katana]

Hello All,

Sorry not posting for ages but have been sidelined for a few weeks due to a bike accideent. Luckily no lasting damage but am still in pain but still alive.

What I would like to see if anyone has these odd parts lying around or knows of anyone who has them so I can get the Kat back on the road, or which other bikes shares the parts so they may be easier to get.
Right hand side footpeg
Right hand side engine casing.
Brake master cylinder and brake lever.
The Trim pieces both sides of the tank at the rear or someone who can remake the tabs(locating pegs)
Rear tail piece around the rear light.

Thanks for your help people.

[Irezumi aka Reuben]

Best thing to do is to pop over to https://www.400greybike.co.uk/ and ask on the forum's as they will know

Look up David Silver spares and Elliott (spelling?) motorcycles. They are good for 400 part's apparently. Also other specialists like BAT (expensive!)

Also check if part's off a 600 KAT fit, may be the same as alot of 400's are sleeved down 600's Suzuki RF400'600 for instance. Need to do some research into that though. For footpegs try the 600 KAT for definate, should fit (unless the frames are significantly different).

Hope you get back riding soon
____________________
Pictorgraphicalfantastical

[katana]

Cheers but unfortunatly 400 greybike does cover the Katana 400. Unfortunatly it's an odd suzuki bike onlyu made for a few years in Japan.

Just hoping to see if any one can help. Will probably post there later tonight.

Thanks though.

[BUSA BOY]

hi katana

you could try www.breakingpoint.co.uk

they are bike breakers in aberdeen.and have quite a lot of stuff
new,old and some strange
of failing that ye could try that partfinder{they advertise in mcn/bike trader etc}
____________________
!!MADE IN SCOTLAND.WHERE THE MEN ARE MEN
AND THE SHEEP ARE SCARED!!

[slowarse]

you could try fastline in preston , they do a lot of grey import parts.,

thats where i get most of the parts for my gsxr400.