Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Blipping throttle stalls

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Kirmit
Nitrous Nuisance



Joined: 28 Oct 2004
Karma :
PostPosted: 10:48 - 18 Nov 2004    Post subject: Blipping throttle stalls Reply with quote
Hi, I have a Honda City Flyer 125. When Idle, either in gear with clutch in or in netrual and I blip the throttle hard the engine stalls. But if I do slowly everything is fine. Any suggestions?

Kirk
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mr.z
World Chat Champion



Joined: 04 Feb 2004
Karma :
PostPosted: 12:42 - 18 Nov 2004    Post subject: Re: Blipping throttle stalls Reply with quote
Kirmit wrote:
But if I do slowly everything is fine. Any suggestions?


Do eveything slowly? Razz

The city fly is the same (i think) as the cg125 engine/carbs wise.. is it doing this when the engine is fully warmed up? (5 minutes of gentle reving or a 5 mile run out) because if its doing it when cold i wouldn't worry too much, mine did, a mates varadero does and to a degree my 500 twin does as well (a good handfull from cold will stop it ded). If this is happening when the bike is fully warmed up then you might have a fueling issue, but even then it wouldn't supprise me entiely if this was pritty much a standard thing anyways... only stalling issue i had on the cg was rain (getting at the ignition system) and allways at lights Sad

If its not happening at lights e.t.c. dont worry about it too much.

Sory i cannot off more insight but somebody helpfull should be allong shortly though Razz Thumbs Up
____________________
>RidingSkills<->Tech Tips<->MyBikes<
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 12:58 - 18 Nov 2004    Post subject: Reply with quote
Hi

As above, not that unusual but generally because it is set up a touch lean off idle. You might be able to improve it but richening the idle mixture a touch (generally a screw which you undo or do up slightly, probably no more than 1/2 a turn) or by dropping the clip down a notch on the needle jet (so the needle is slightly higher in the carb slide).

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kirmit
Nitrous Nuisance



Joined: 28 Oct 2004
Karma :
PostPosted: 13:49 - 18 Nov 2004    Post subject: Reply with quote
Thanks for the quick response. So far I've only had a problem when I've first got on. Will try again tonight once its warmed up for 5-10 minutes.

Very Happy Very Happy
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 103 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.64 - MySQL Queries: 14 - Page Size: 41.78 Kb