bike security

[mark bentley]

check this out
www.yanchor.com
____________________
Y anchor

[Ste]

Can you please stop spamming your site all over the place, or at least change it so it doesn't damage the eyes of anyone who looks at it and remove the music. https://www.okas.co.uk/stuff/spam.gif

[mark bentley]

music removed
____________________
Y anchor

[Sparks!]

As annoyingly spammy as it is, the anchor does look pretty sturdy, and flush fit, looks a bit better than some others on the market
____________________
Current Toys: 06 Yamaha WR250F | Nissan 350Z GT | Tech 4 Homes

[Mr.Everready]

check this out
www.knobjockey.co.uk
____________________
the undemocratically unelected mod of the Scottish section

[haGGard]

Hey! Thats not a real website

[Mr.Everready]

[Mr.Everready]

lol www.knobjockey.net works
____________________
the undemocratically unelected mod of the Scottish section

[Mr.Everready]

the freeview page is worth a look *nws* mind
____________________
the undemocratically unelected mod of the Scottish section

[mark bentley]

[TheShaggyDA]

Maybe you could develop a W anchor, for two bikes?
www.wanchor.com is still available
____________________
Current: CB500 Previous: CB100N, CB250RS, XJ900F, GT550, GPZ750R/1000RX, AJS M16, R100RT, Enfield Bullet

[i:6e3bfc7581]But still I fear and still I dare not laugh at the madman...[/i:6e3bfc7581]

[mchaggis]

[r1_lad]

[Danny]

[Lone-Wolf]

[mchaggis]

[stinkwheel]

Or there is always the stinkwheel enterprises ground anchor made using a piece of off-cut box section with four holes drilled in it and four M12 rowl bolts to fix it to the ground and a wall.

Total cost approx £6 for 1/2"HSS drill bit, masonary drill bit and four rowl bolts. Build and fitting time, 20 mins tops. Bolt heads are inaccessable when chain is run through.

https://www.bikechatforums.com/download.php?id=5621
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[craigie b]

Is there no end to the stinks ingenuity? I always think of mad max when he posts!

[mchaggis]

That's a pretty neat idea, Stinkwheel. What kind of bolts are they? Just wondering about the possibility of it being pulled out. Are the bolts through the floor and into the wall as well? That should work pretty well and I may have to borrow your idea in the future.

edit: Okay, I didn't read your post properly, it is bolted to both, and I'll just go look up rawl bolts.
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush.

[stinkwheel]

Rawl bolts:

https://www.climbhigh5.com/Climbing/Bolts___Anchors/Rawl_Bolt/Rawl_Bolt1.jpg

The two piece metal sleeve expands as you tighten down the bolt.

M12 ones are f-ing big.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.