NSR lights

jimbob_is_god · Derestricted Danger Joined: 26 Sep 2004 Karma :

Hi

Both of my normal beam fillaments have recently blown, so after much difficultly getting them out Evil or Very Mad

im wondering, what is the max wattage bulb i can put in, without over loading the wire or fuse? Confused

Any help would be mostly apprecieated

Thanks
____________________
nsr125r
complete with jolly moto system

alains · World Chat Champion Joined: 08 Jul 2004 Karma :

max is 12V 35/35 W , actually you will be able to find some halogen bulbs which are more efficient . i know taking out the front fairing is bowring , but not very difficult . pay attention to refit properly the rubbers behind the lights because humidity .
____________________
the worst day fishing is better than the best day working

c058y · Nova Slayer Joined: 17 Jul 2004 Karma :

I did actually put some 45w bulbs in, didn't seem to be any problems with the electrics, charging etc.

The bad point was they got really hot and warped the holder the bulb goes in! YOU HAVE BEEN WARNED!!! Shocked

By the way heres a picture of the ones I needed, maybe you did to. I find its easier to take a picture of the bulb rather than take the bulb out, ride to the shop and then fit it, but thats me!

Double filament main bulb: Bosch Cap
Side lights: Wedge capless

WHOOPS, POSTED PICTURE TWICE

alains · World Chat Champion Joined: 08 Jul 2004 Karma :

the picture is too bad for having an idea , but if you stick on your 45w i can insure that you will destroy you head light due to heath (it's only plastic coated with stuff which will disapear quite fastly)
it's up to you , and i cannot propose to buy some for you , because you drive on the wrong side of the road
____________________
the worst day fishing is better than the best day working