ANOTHER de-rerestricting question!!

[NSRracer]

i'm using the de-restricting guide on NSR125.com and i've taken the 2 bolts off connecting the exhaust to the pillion foot rest and just underneath the rear brake.

But now i've become stuck on where else the exhaust is connected.

As stated on NSR125.com:
3) Undo the two nuts holding the exhaust manifold to the head with a 12mm socket and take them off.

Can someone please help me with where this is..

Also Looking at these technicals
https://www.nsr125.com/schem34.jpg

Could you tell me where the restrictor is actually in place ..?!?

Thanks ladz..

[mr jamez]

Trace the exhaust back to the engine, you will see two nuts holding the exhaust onto the barrel.

[distortion]

^^^ follow the above.

Remove the nuts and the exhaust should completely come away from the bike.

on the inside of the exhaust (inside the hole is where the restrictor is) you should see 2/3 blobs of metal weld. Follow the website instruction from there on.

P.S. - wait for the exhaust to cool down before you do this if you have just ridden it & make sure the keys are NOT in the bike as a friend of mine lost the top end of his finger whilst working at that end of the bike because the keys were in and someone pressed the start button !!!!

[NSRracer]

aite thanks ladz

and i don't think i'll be doing that distortion