Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Rs125 top end.

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

matty8887
Scooby Slapper



Joined: 15 Apr 2005
Karma :

PostPosted: 22:39 - 06 Jun 2005    Post subject: Rs125 top end. Reply with quote

Hey guys,

im fairly mechanical but i would prefer it if i had a guide to follow to rebuild my top end on my rs125.
Do any of you know where i can find one on the internet?

Also recently ive noticed a strange noise, when ive been out and then came back and turned it off there is a pingin noise coming from the exhaust or somewhere by it. Its like when it is cooling down and it makes a pinging noise but it never use to do it.

An when i push the bike it sounds as if the brake pads are to tight to the discs. How would i rectify this?


cheers Thumbs Up
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dransy
World Chat Champion



Joined: 04 May 2005
Karma :

PostPosted: 22:45 - 06 Jun 2005    Post subject: Reply with quote

Quote:
. Its like when it is cooling down and it makes a pinging noise but it never use to do it.

isnt that the disc colling down after uve been braking hard?
Quote:
An when i push the bike it sounds as if the brake pads are to tight to the discs. How would i rectify this?

my rs also does this but ive not took no notice to it seems ok wen im out and about?
____________________
Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ash t
World Chat Champion



Joined: 16 Dec 2004
Karma :

PostPosted: 22:45 - 06 Jun 2005    Post subject: Reply with quote

125ccsportsbikes.com

Someone will be able to find you a guide mate!!
____________________
When You're Starting To Choke, Take Some Pills With Your Coke, Its Hyserical
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

matty8887
Scooby Slapper



Joined: 15 Apr 2005
Karma :

PostPosted: 22:49 - 06 Jun 2005    Post subject: Reply with quote

Yes could be that its the discs cooling down but i never noticed it before.
But my bike does seem to slow down alot faster now if im off the throttle so im thinking that the brake pads are too tight on the disc?

Ye ash t i will try there, just copy and paste it Mr. Green
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dransy
World Chat Champion



Joined: 04 May 2005
Karma :

PostPosted: 22:50 - 06 Jun 2005    Post subject: Reply with quote

my break pads didnt used to rub on the disc when i pushed it but do now
dunno how they have got tighter on there own?
____________________
Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Minky_monkey
Traffic Copper



Joined: 01 Aug 2004
Karma :

PostPosted: 22:52 - 06 Jun 2005    Post subject: Reply with quote

Have the pads actually got enough material on them, the reason I ask, is that I had the same thing and it turned out the rear pads were shagged.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ash t
World Chat Champion



Joined: 16 Dec 2004
Karma :

PostPosted: 22:53 - 06 Jun 2005    Post subject: Reply with quote

Dransy, they might have gotten dirty...take the calliper off, rub the disk side of the pad with a dry cloth, and clean the back of the pad with somthing, and then apply a bit of copper grease to THE BACK of the pad!
____________________
When You're Starting To Choke, Take Some Pills With Your Coke, Its Hyserical
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

matty8887
Scooby Slapper



Joined: 15 Apr 2005
Karma :

PostPosted: 22:53 - 06 Jun 2005    Post subject: Reply with quote

Dunno mate, maybe someone else will know?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dransy
World Chat Champion



Joined: 04 May 2005
Karma :

PostPosted: 22:54 - 06 Jun 2005    Post subject: Reply with quote

Quote:
Dransy, they might have gotten dirty...take the calliper off, rub the disk side of the pad with a dry cloth, and clean the back of the pad with somthing, and then apply a bit of copper grease to THE BACK of the pad!


kk cheers Thumbs Up might aswell do it tomorrow when im takin my exhaust off and my gearbox apart lol Sad
____________________
Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

matty8887
Scooby Slapper



Joined: 15 Apr 2005
Karma :

PostPosted: 22:56 - 06 Jun 2005    Post subject: Reply with quote

Well my brake pads were changed not long ago but the noise is coming from the rear so it could be shagged?

Suppose id better have a look tomorrow.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Minky_monkey
Traffic Copper



Joined: 01 Aug 2004
Karma :

PostPosted: 22:58 - 06 Jun 2005    Post subject: Reply with quote

With mine, there was always a certain amount of contact with the disk but you never noticed it until the rear pads had worn down.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 111 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.55 - MySQL Queries: 14 - Page Size: 68.43 Kb