Wheel rebuilding

[robbiehall]

Does anyone have an easy to floow guide for respoking a wheel?, not the truing part, just lacing the spokes into the rim...


Cheers
Rob
____________________
The older I get, the faster I was.

[stinkwheel]

There is one already fitted to your bike. Copy it. Digital photos are useful.

Last one I did (when I was young and stupid before I knew about truing wheels etc) I taped one rim to the other then moved the spokes up to the new rim one at a time. I still have that wheel, it is surprisingly straight considering I never used a jig
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[robbiehall]

Well, if I hadn't taken them all off a few months ago, of course I would be doing just that, and, I have a few pics of the wheels before I removed the spokes, but, still i find it difficult to translate from 2D to 3D when I am actually sitting in frint of the rims and spokes.

So, do you have a guide to follow? That is my question friend.


Rob
____________________
The older I get, the faster I was.