Problem with lights on nsr 125

trafficdodger · Scooby Slapper Joined: 19 Jun 2005 Karma :

Hi people yet another problem with my nsr, seems to keep going wrong at the moment anyway the bloody thing seems to keep blowing holes in the left main head light bulb any ideas what is up with it all the other bulbs are fine but this has happened twice now.

Cheers

Nige
____________________
Present bike Yamaha R6

alains · World Chat Champion Joined: 08 Jul 2004 Karma :

check connectors & contacts , these are pretty sensible to oxydation . take off rubber cover , undo connector , take off bulb . clean contacts on the bulb with 400 waterproof sandpaper , on the connector push down the 3 contacts to make them harder . refit the bulb , refit the lot , verify the terminals going on the connector (thight a bit with pliers if necessary) and it will be ok , verify any crack on the rubber cover , humidity is not a good thing for the light .
____________________
the worst day fishing is better than the best day working