Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Should the front wheel spin freely??

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Slinn84
Scooby Slapper



Joined: 20 Apr 2004
Karma :
PostPosted: 21:59 - 25 Jul 2005    Post subject: Should the front wheel spin freely?? Reply with quote
hey
just had my bike in my garage to change the front wheel. when i had finished i tried to test the run out of the front discs so i got the wheel off the ground and tried to spin it, after the wheel had turned one complete revolution it slowed and stopped

should this happen? is it safe to happen, and if not what could be causing the wheel to not spin completely free

p.s i also cleaned the brake calipers and pads and noticed that one of the postions was very stiff. could this be whats causing the problem (i.e pushing onto the pads and not releasing the pressure when the brake is not being used)

cheers
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :
PostPosted: 22:08 - 25 Jul 2005    Post subject: Reply with quote
Brake discs usually do bind slightly which would stop the wheel spinning freely.

They shouldn't bind too much though. A good way to check is to go for a short ride without touching the front brake. When you stop (using the back brake) feel the disc. If it is hot, they are binding too much.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Slinn84
Scooby Slapper



Joined: 20 Apr 2004
Karma :
PostPosted: 22:45 - 25 Jul 2005    Post subject: Reply with quote
cheers
good plan
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Jrod
Page 3 Girl



Joined: 02 Aug 2004
Karma :
PostPosted: 03:50 - 26 Jul 2005    Post subject: Reply with quote
Can you do this for the rear aswell, my rear wheel only spins about 1/4 of a turn when I spin it. Confused is that right? Even with caliper off It doesn't spin much more. Could it be bearings?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

PsychoHippy
Jammy Git



Joined: 02 Jul 2002
Karma :
PostPosted: 04:16 - 26 Jul 2005    Post subject: Reply with quote
I would expect the rear to spin fairly freely, certainly more than 1/4 turn.
Have you checked you haven't got the bolt on the rear spindle too tight?
Is there greese on the spindle/bearings?
Is the back brake binding?

Those are the obvious things I can think of.
____________________
I spend all my money on bikes and beer, the rest I simply waste!
 Back to top
View user's profile Send private message You must be logged in to rate posts

BFG
Brolly Dolly



Joined: 14 Feb 2005
Karma :
PostPosted: 09:59 - 26 Jul 2005    Post subject: Re: Should the front wheel spin freely?? Reply with quote
Slinn84 wrote:
p.s i also cleaned the brake calipers and pads and noticed that one of the postions was very stiff. could this be whats causing the problem (i.e pushing onto the pads and not releasing the pressure when the brake is not being used)


Yes.

stinkwheel wrote:
Brake discs usually do bind slightly which would stop the wheel spinning freely.

They shouldn't bind too much though.

Agreed - If you spin the wheel hard - you should certainly get a lot more than 1 rev. This extra friction will slow you down, as well as overheat the brake components.

stinkwheel wrote:

A good way to check is to go for a short ride without touching the front brake. When you stop (using the back brake) feel the disc. If it is hot, they are binding too much.


Note of caution - do not touch the disk immediately, spit on it first. Unless you want a skin graft that is Wink
 Back to top
View user's profile Send private message You must be logged in to rate posts

BFG
Brolly Dolly



Joined: 14 Feb 2005
Karma :
PostPosted: 10:01 - 26 Jul 2005    Post subject: Reply with quote
Zxr400er wrote:
Can you do this for the rear aswell, my rear wheel only spins about 1/4 of a turn when I spin it. Confused is that right? Even with caliper off It doesn't spin much more. Could it be bearings?


More likely dry chain or tyre is rubbing something. Might be gearbox drag. Is the oil viscosity right?

Take the chain + caliper off and try spinning again to test this. If it is bearings, change them asap as they will be totally f8cked if they're causing drag.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Gazdaman
I did a trackday!!!



Joined: 12 Aug 2004
Karma :
PostPosted: 11:32 - 26 Jul 2005    Post subject: Reply with quote
Front brakes will bind quite easily, on a few bikes since they've been left for a while the front wheel will only complete about 1 rev.

I found the simple solution is to simply ride it. Failing that a caliper rebuild, which is a 15 minute job.

Gaz
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 98 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.19 - MySQL Queries: 14 - Page Size: 57.21 Kb