Aftermarket indicators

[matty8887]

HI all, i am buying some aftermarket indicators for my rs125 for the fornt and back and would just like to know if these would fit with no modification needed? https://cgi.ebay.co.uk/Mini-Motorcycle-Indicators-ARROWshape-carbon-blackNEW_W0QQitemZ7991432443QQcategoryZ9946QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

They are universal but will they go onto the back ok?

cheers

[Kickstart]

Hi

Depends on the size of the indicator stalk on those, and that you cannot really see in the picture.

Anyone else not seen a Halogen indicator bulb before?

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[Metal_Mickey]

The chances are that you will need some of the Motrax (assuming the indicators are also made by Motrax) indicator spacers as well. This is because the original indicators tend to be a bit large and leave an unpleasant hole when they are removed, so the spacers cover up this hole and make the new indicators a bit more pleasing on the eye.

[matty8887]

Hi, it says they can be bought with a long or short stem, would i have to buy the long stem?

Metal mickey, i do have one arrow indicator and it does look ok so i think they should look good.

Do you know if they just go straight on at the back aswell because they attach to the reg bracket.

cheers guys

[Kickstart]

Hi

Think the Aprilia ones have a small hooked bracket and then an M6 bolt. These might just go through the hole the bolt currently uses, but will leave the slot that the hooked bit goes through. Probably not noticeable.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[dransy]

they look like the ones i have on my rs except mine have iridum lense not orange
____________________
Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles