pictures of me tyre, is this what a plug looks like?

[gimpy limp]

does this look dodgy to anyone else? The pictures really do a crap job of picking it up but it almost looks like a skin behind the tyre wall with 2 plugs in it? The tyre has a verrrry slow leak somewhere (takes 2/3 weeks to go down) so I took it off to inspect it before taking it to a garage. The rest of the tyre looks mint 95% of the original tread on it and no damage. It's either this or it's not seated correctly (inside's corroded) :

https://img328.imageshack.us/img328/479/cxtyre011optimised25km.jpg

https://img328.imageshack.us/img328/6537/cxtyre014optimised28pl.jpg
____________________
-=[Sam/b]=- cx500's the only way to travel, we do it in style just like jimmy saville
msn addy - sam.barwick@ntlworld.com
https://pre-auto.com/cx500/rat_and_survival_gallery_2006

[mchaggis]

Those look like normal moulding marks to me. (Where they've injected the rubber).
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush.

[G]

As mentioned, they look normal.

Have you checked the valve?

[Davo]

That's not a plug, you can't/shouldn't plug a tyre wall

[Flip]

Just mould marks. I'm voting for G's valve theory.

Plugs are obvious.

[gimpy limp]

valve and the rest of it seem ok jsut thats the only thing that looked abit dodgy. I'll just take it down as it is let them sort it I can't see anything obvious. By ok i mean the valve looks clean and seate where it should be and has it's cap on.
____________________
-=[Sam/b]=- cx500's the only way to travel, we do it in style just like jimmy saville
msn addy - sam.barwick@ntlworld.com
https://pre-auto.com/cx500/rat_and_survival_gallery_2006

[Flip]

Double post. Arse

[Flip]

Get some soapy water and throw it over the vavle. If it bubbles it leaks.

[gimpy limp]

just lobbed it in the bath (left the bath stinking whislt I was at it) and I can't find any bubbles anywhere I don't think it's pumped up enough what pressure shall I pump it up to? The air thing at the garage by me is out of surface at the moment so will have to wait.
____________________
-=[Sam/b]=- cx500's the only way to travel, we do it in style just like jimmy saville
msn addy - sam.barwick@ntlworld.com
https://pre-auto.com/cx500/rat_and_survival_gallery_2006

[Flip]

Pressure will be in your bikes handbook mate.

When the valve is under the water wiggle it around (stop right there ) and see if that makes a difference.

FWIW. Garage forecourt pumps are not the best to use.