jetting up a RACE CAN

[riichy]

well i am bidding on a RACE can on ebay, its for a zxr400. now my bike is standard so is the can, so when i fit the race can how important is it to jet it up. or will it be fine if i just stick it on

thanks richy
____________________
.......... PLOD ............ zx636 2004

[G]

It will probably be fine if you just stick it on, possibility you may make it run lean however.

If you're spending money on the can, you might as well spend money on the jetting as well, that will have a bigger difference in performance probably.

[riichy]

this is going to seem a stupid queastion but, were might i get it jetted up and how much would it cost...........
____________________
.......... PLOD ............ zx636 2004

[G]

Not sure really on prices.

Ideally you want to get to a place that has a rolling road or 'dyno' (not to be confused with dynojet, which is a brand of jets) they will probably be able to supply jets and set it all up so it runs perfectly.

Know of a few places around here, but not sure where you are.

[riichy]

west yorkshire... al have a look on the net for em

thanks anyway
____________________
.......... PLOD ............ zx636 2004

[Mr C]

well worth looking up John Warrington in Malton

he's the best dyno man in the North imho of course
____________________
187.3bhp = 201mph

[riichy]

will do MRC
____________________
.......... PLOD ............ zx636 2004