 theshmoo Bottomless Pit

Joined: 23 Jun 2004 Karma :     
|
|
 alains World Chat Champion

Joined: 08 Jul 2004 Karma :    
|
 Posted: 22:23 - 08 Oct 2005 Post subject: |
 |
|
i will not be surprised if the problem is your ignition . if you fit a BR9ECS , very often they are weak , try to reduce the gap at 0.6 mm . if it does not work , change it . try to buy a BR9EIX (£6.84 ex VAT)
https://www.sparkplugs.co.uk
also check the cap , it must be firmly in the bottom (i suppose you have taken off the round nut on top of the plug , do not laugh i saw that several times)
but , what i will do too is :
- clean tank tap & carb (at this occasion check which jets you have : the best are 138,42,65 mount those if you have not https://www.dellorto.co.uk £3ish each)
- adjust the play of the valves cables coming on the servo pulley and check timming ____________________ the worst day fishing is better than the best day working |
|
 theshmoo Bottomless Pit

Joined: 23 Jun 2004 Karma :     
|
 Posted: 23:11 - 08 Oct 2005 Post subject: |
 |
|
thanks Alain will do  ____________________ CBR 1100 blackbird. |
|