plug for kinroad hongdou

[scottc1088]

what ngk plug should i use in my hongdou, it has a kinroad engine in it btw
thanks
____________________
2000 Derbi Senda R, Malossi 80cc, evolution n.g. full circle race crankshaft,26mm carb,Malossi mhr exhaust,TNT filter,Hebo reedblock + carbon reeds,Alien front light,Kundo 330mm rear shock,13-53
Breaking 2000 senda r

[scottc1088]

on the top end it seem to mis-fire do you think this is the plug breaking down?
thanks
____________________
2000 Derbi Senda R, Malossi 80cc, evolution n.g. full circle race crankshaft,26mm carb,Malossi mhr exhaust,TNT filter,Hebo reedblock + carbon reeds,Alien front light,Kundo 330mm rear shock,13-53
Breaking 2000 senda r

[mchaggis]

NGK DR8ES-L is what I use, it's the standard one for the CG125 engine. If it's misfiring under load, I'd check the condition of the plug and see if its fouled with carbon/ oil etc.
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush.

[scottc1088]

its not really under load its just on high revs if i put it under load it pulls fine
its only done 100miles but its a chinese plug in it so reckon ill change it to the dr8es
cheers
____________________
2000 Derbi Senda R, Malossi 80cc, evolution n.g. full circle race crankshaft,26mm carb,Malossi mhr exhaust,TNT filter,Hebo reedblock + carbon reeds,Alien front light,Kundo 330mm rear shock,13-53
Breaking 2000 senda r

[knockout_bar]