Another quick MOT question

[instigator]

I know, I;m terrible but my bike has it's MOT tomorrow.

I read, perhaps off this forum, that if the bike is equipped with pillion footpegs then it must have the pillion seat? Or was it the other way around?

If so, my bike has a solo seat cover (and I don't have the seat yet). Is it adviseable I remove the pillion footpegs?

Cheers

EDIT - Please don't link me to MOT sites, I can't find it on them, unless you have found the answer somewhere.

[kat250]

cant se it being a problem mine made it through without the pegs being off
____________________
in the famous word of jimmy pop "would you F*ck me for blow"
In the words of banditshigh "would you blow me to f*ck"

[TL666]

Its the other way round mate. It won't fail on that

[instigator]

[distortion]

p.s. - dont forget to have a reflector on the number plate - i know you didnt ask - but its something that is regularly forgot about

[Type_Mo]

IIRC - If you have a pillion seat then you need rear pegs.
and the reflector is always a little thing thats forgotten alot!!!
____________________
- Typhoon ?0 - Yamaha DT125R - Aprilia SR125 - Yamaha DT125R - Honda Hornet 600 -

[instigator]

Remembered the reflector, it was stuck to the number palte and didn't raise an eyebrow.

I, however, did not have a number palte light or any form of clear light shining onto the number plate. All he did was give me a sheet saying I should sort these things out. Glad he doesn't know about it to be honest.

[kat250]

greg where did you take it for the mot
____________________
in the famous word of jimmy pop "would you F*ck me for blow"
In the words of banditshigh "would you blow me to f*ck"

[instigator]

[kat250]

Not now the guy quit lecturing us he couldnt handle a 3 hour class a day and work at haldanes you could try and just sit and call him a quiter
____________________
in the famous word of jimmy pop "would you F*ck me for blow"
In the words of banditshigh "would you blow me to f*ck"

[instigator]

[kat250]

yeah today but hes only a quick fix waiting for a new one.
so the hornet in a decent state or you unsure on some things on it
____________________
in the famous word of jimmy pop "would you F*ck me for blow"
In the words of banditshigh "would you blow me to f*ck"

[instigator]

Hmm, pretty sure it'll pass to be honest, only thing they could possibly bitch about is that the clutch cable does get in the way when turning the bars to the left but it is VERY minimal, you can just hear it stretching a little.

Hardly something that you can really fix though I mean, it's not like winky head bearings where the garage would be glad to fail it on the MOT to get the work done if you know what I mean.

Pretty sure it'll pass. Need to find somewhere to do it, rather not haldanes to be honest.

[kat250]

i agree totaly from what ive heard haldanes should be avoided like the plauge on used if last resort ever
____________________
in the famous word of jimmy pop "would you F*ck me for blow"
In the words of banditshigh "would you blow me to f*ck"