brake pads need changing

[jamie192]

I have a zxr 400 and im looking for front pads, i am just wondering are the zxr 400 4 pot calipers and any idea what some good ones are?

Thanks all.
____________________
Ride Fast, Brake hard, don't fall off!

[The Old Geeza]

[The Tot]

I use EBC HH's on my ZXR250 but then, they're 2 pot calipers as opposed to 4 pots. You'd get plenty of replies from all the ZXR owners on the forum. Failing that, going stock won't do your bike any harm.
____________________
The Tot 2019 Z1000SX - 2007 R1
Never argue with autism

[mchaggis]

[EuropeanNC30R...]

They are 4-pots, it is rather obvious if you look

(2 pistons on either side)

EBC HH and Carbon Lorraine are good.

[mchaggis]

Pfft! There's only two pots acting on each pad.

Even if they are four pot calipers (floating discs I suppose).
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush.

[EuropeanNC30R...]

Semi-floating are pretty much standard on sportsbikes.

[jamie192]

so the ebc hh's will fit then, because i kinda ordered them because i need them quite badly i think i literally have nothing on one side.

Thanks for replies, and also thanks mchaggis for worrying me for a few seconds .
I didnt think i was that dumb considering i looked and could see 4 pistons.
____________________
Ride Fast, Brake hard, don't fall off!