Clutch question

tatters · Exxon Valdez Joined: 04 Jan 2004 Karma :

Hi guys

Just need some reasurance before l put the clutch back together on the YZF1000R.

Now in the Workshop manual it states that one plate has a noch in it and that it should be alliged with the two nochs on the clutch basket, on the pattern plates that l have brought and the pattern plates that have been taken out (which l losted the stacking order of Mad

) there is no plate with an noch just one plate has smothed tongs insted of a lower groove.

Is this smooth the plate the noched plate they are talking about? and if so does it go to the top or bottom of the stack of plates?, . (all other clutchs l,ve worked on have a different plate that went on the top of the stack) plus how the hell can l line the plate up with the nochs with no noch on its self.

https://www.bikechatforums.com/files/clutch4.jpg

https://www.bikechatforums.com/files/clutch3.jpg

https://www.bikechatforums.com/files/clutch2.jpg

https://www.bikechatforums.com/files/clutch1.jpg
____________________
Past:NRG50,AF1125(x2),NSR125RR,ZZR250,CX500,VFR400,KR1S,ZZR600(x2),CB400N,YZF1000(x2),KH125,Z200,FX400R,CBR954RR(x2)GPZ500S,GT550,VFR750F(x2),RD350N,XR650R,CBR600F,CB250,KDX250,YZF750R,CRM250,400EXC,KLR650,TTR600RE,DR350S,R100GSPD,RGV250,VMAX1200,DL650,KZ750 Present:G650XC,C12,CRF450X,1190ADV

3806danny · Spanner Monkey Joined: 15 Aug 2005 Karma :

youhave put a lot of effort in but sorry i cant help

tatters · Exxon Valdez Joined: 04 Jan 2004 Karma :

I fitted it with the diffrent plate on top and its runing fine, no more silpping clutch Dance!

____________________
Past:NRG50,AF1125(x2),NSR125RR,ZZR250,CX500,VFR400,KR1S,ZZR600(x2),CB400N,YZF1000(x2),KH125,Z200,FX400R,CBR954RR(x2)GPZ500S,GT550,VFR750F(x2),RD350N,XR650R,CBR600F,CB250,KDX250,YZF750R,CRM250,400EXC,KLR650,TTR600RE,DR350S,R100GSPD,RGV250,VMAX1200,DL650,KZ750 Present:G650XC,C12,CRF450X,1190ADV