Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


nsr plate restriction and exhaust restriction

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Blunet600
Nearly there...



Joined: 03 Dec 2005
Karma :

PostPosted: 20:28 - 27 Jan 2006    Post subject: nsr plate restriction and exhaust restriction Reply with quote

does it matter if i didnt bother taking out the restriction on the air intake on the carb, and just derestrict the exhaust?
Coz i know there is a restriction and im pretty sure its in the exhaust nto the air intake, but i tried checking and i wasnt confident enough once i got the air filter out to go any further. woudl it make any problems or anything if i just derestricted the exhast and left the carb restriction?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

alains
World Chat Champion



Joined: 08 Jul 2004
Karma :

PostPosted: 23:47 - 27 Jan 2006    Post subject: Reply with quote

it's not in the "air" intake , it's in the mixture intake between exit of the carb and engine entry . this limits the volume of the mixture getting in the barrel , you should take that off .(number 3)
____________________
the worst day fishing is better than the best day working
 Back to top
View user's profile Send private message You must be logged in to rate posts

Blunet600
Nearly there...



Joined: 03 Dec 2005
Karma :

PostPosted: 14:39 - 01 Feb 2006    Post subject: Reply with quote

im not sure where exactly this restriction is, hwo far and how much do i need to take out?
any pics that show it? coz i have got to the air box and taken it off, and i cant get the plastic tray off that protects the carb and i thought the restrictor was between the air box and the carb?lol
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mrsteko
Nova Slayer



Joined: 29 Sep 2005
Karma :

PostPosted: 15:21 - 01 Feb 2006    Post subject: Reply with quote

u don't need to take that tray out, pull the bits at the corners nearest the back of the bike outta the round holding joints and angle the whole thing up. This allows access to the carb and then the pipe between the carb and the cylinder. Now, between this pipe and the cylinder is the plate that alain was trying to tell you about.

You know what, got to the main page www.nsr125.com and look at the derestricting section, lots of pictures!

later
____________________
Theory passed Dec 05 : Practical passed 28th April '06
Bikes : 1999 NSR 125 R (sold)
: 1998 bandit 600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mrsteko
Nova Slayer



Joined: 29 Sep 2005
Karma :

PostPosted: 15:22 - 01 Feb 2006    Post subject: Reply with quote

u don't need to take that tray out, pull the bits at the corners nearest the back of the bike outta the round holding joints and angle the whole thing up. This allows access to the carb and then the pipe between the carb and the cylinder. Now, between this pipe and the cylinder is the plate that alain was trying to tell you about.

You know what, got to the main page www.nsr125.com and look at the derestricting section, lots of pictures!

later
____________________
Theory passed Dec 05 : Practical passed 28th April '06
Bikes : 1999 NSR 125 R (sold)
: 1998 bandit 600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Blunet600
Nearly there...



Joined: 03 Dec 2005
Karma :

PostPosted: 23:03 - 01 Feb 2006    Post subject: Reply with quote

huh? the pics on nsr.com are what i followed and i had trouble. whatu mean nearest the back of the bike. there is a black tray at under the taken near the front of the biek that protects or is lying above the carb. i cant get this off.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mrsteko
Nova Slayer



Joined: 29 Sep 2005
Karma :

PostPosted: 13:20 - 03 Feb 2006    Post subject: Reply with quote

I've just looked at that guide. Standing behind the bike looking into the bay, undo the bolt on the left and the clip on the right and that tray will lift up over and above the carb.
____________________
Theory passed Dec 05 : Practical passed 28th April '06
Bikes : 1999 NSR 125 R (sold)
: 1998 bandit 600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 20 years, 193 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.14 - MySQL Queries: 14 - Page Size: 52.18 Kb