GPZ 750 up for breaking

satans_BIG_helper · Nearly there... Joined: 28 Dec 2004 Karma :

This will only happen if the deal i have lined up falls through but please register your intrest ready for when i start ripping it to bits Smile

Right everything you see is up for grabs plus i have standard body work for it too and orignal indicators, n various other odds n sodds

Offers welcome for the lot buyer to collect tho as i cant post a engine Laughing

Among the stuff on the bike there is

I have 2 sets of calipers both of them need new seals and pistons.

a Bitubo rear shock that is new and in mint condition

ABFM (or AFM) top yoke conversion kit,

The front forks have been rebuilt with new seals and progressive springs plus the anti dive is blanked off

Some spacers on the front wheels to allow for a 4pot brake caliper conversion

GPZ900 ignition works perfectly on the 750

CBR600 switch gear modded to plug directly into the GPZ wiring loom and they work perfectly and look a lot tidier.

The Fuel guage/console is in perfect working order

2 exhausts one harris style one which is partially paninted with BBQ paint i ran out of time to prep and paint it, the other is a NETA system which is a bit tatty and needs a hole welding up both of them have downpipes and all the collets (from my memory)

most of a gasket kit, New Chain and sporocket kit,

If its not listed or in a pic just ask as im pretty certain i have it 8)

Will break the engine down to pieces if there is enough intrest post here what your after and next weekend or before if i have time i will take it off and send you better pictures n prices.

https://img.photobucket.com/albums/v143/Satans-Helper/25b5eea0.jpg
https://img.photobucket.com/albums/v143/Satans-Helper/fa8c9b76.jpg
https://img.photobucket.com/albums/v143/Satans-Helper/524489c8.jpg
https://img.photobucket.com/albums/v143/Satans-Helper/cc38bb75.jpg
https://img.photobucket.com/albums/v143/Satans-Helper/fd1553cb.jpg
https://img.photobucket.com/albums/v143/Satans-Helper/Image018.jpg
https://img.photobucket.com/albums/v143/Satans-Helper/Image009.jpg[/quote]

satans_BIG_helper · Nearly there... Joined: 28 Dec 2004 Karma :

Carbs £40 ono
HAris style exhaust £50 ono(inc downpipes)
neta exhaust £30 ono (inc downpipes)-needs
2 front n 1 rear caliper £15 (no pistons)
Same as above
Chain n Sprocket kit (New) £30
Front wheel inc tyre (discs knackered) £25
Rear Whyle in tyre (disk fooked) £25
Side Panels Pair of £10
Tail piece inc grab rail £15
Seat excellent condition been recovered £20
Orignal Nose Cone (inc subframe thingy) £20
Tank (no leaks paint bubbled in places)including the console bit which works £25
Air box £10
Bitubo Rear Shock £75
Forks (rebuilt with Progressive spring and new seals anti dive blanked off) £50
ABFM(AFM) Top yoke conversion (inc risers) £60
CBR 600 Switchgear modded to plug straight into GPZ loom £15
std top n bottom yoke inc stem £5
Std mirrors good nick might even have the rubber pads £5 the pair
All engine parts avaliable condition unknown just make me an offer including side casings
Oil cooler inc lines £6
Swingarm £20
Std bars £5
Renthal copy bars £5
HEadlight brackets £5
HEadlight shell + rim £5
Clocks £20
Centre Stand £5
Side stand £4
Near new battery dont know how well it would travel in the post tho but £5 n its urs

Anything Else drop me a PM as i have a full bike + loadsa spares

All these are ono and are + P&P ppl can come n collect if they want

Nath · World Chat Champion Joined: 28 Jul 2004 Karma :

What happened to your streetfighter project?
____________________
Hard livin', hard luck.

satans_BIG_helper · Nearly there... Joined: 28 Dec 2004 Karma :

I got some urgent bills come through and i need a new pc fast for work... so it has to go Sad

im young enough to start again so its not a problem really... i will let the whole bike go for £350 with all the parts i have too which i think is a fair price for a not far off completed bike

or people can buy the bits from me Razz

Bod · Traffic Copper Joined: 18 Mar 2004 Karma :

Where bouts are you?? How much do you want for the engine?? After an engine for my go kart.

satans_BIG_helper · Nearly there... Joined: 28 Dec 2004 Karma :

you got PM bod

edd · Nearly there... Joined: 06 Jul 2005 Karma :

I am interested in buying the whole bike. Is it a runner, what miles has it got on it? What does it need to complete?
____________________
Bluespark Automotive - Diesel Tuning for Performance and Economy

satans_BIG_helper · Nearly there... Joined: 28 Dec 2004 Karma :

The bike needs the tail piece securing(bracket welding on) a pair of mito seats, brake discs, calipers and brake lines (or piston rebuild kits).... Front and rear master cylinders for the brakes...Throttle assembly.. general little touches.. rear indicators n

The engine did run when i last had the exhaust on it i have not started it since as i want to avoid pissing my neighbours off too much.. im not sure of the mileage but i can check if your intrested.. i have all the paperwork, a couple of manuals...

possibly some more i cant remember really

edd · Nearly there... Joined: 06 Jul 2005 Karma :

if you pm me your number id like to talk to you about the bike, as i say im very interested since i have my zephyr in a part-working condition
____________________
Bluespark Automotive - Diesel Tuning for Performance and Economy

satans_BIG_helper · Nearly there... Joined: 28 Dec 2004 Karma :

You have PM sir Smile