CBR600 Project Bike

[jay12329]

Just testing the water as i'm having cash and space issues.
My CBR600Fh Project bike.
I'm most of the way through restoring this bike. Basically just needs putting togther. I havnt had the time to sort it.
I have a compleate bike with these spairs,
Wheels, inc tyres, disks, spindles.
Full set of brake calipers and hoses.
Frame, swaing arm, forks and shock.
and carbs.

Left to do is genrall putting together. Forks need swapping with the spairs. Rear indicators need attaching. Body work is ok, but i was planning on painting it. All body work need to be fitted.

My new job has ment that in the last 5 months (since i started) I've manage to remove the carbs and reinstall them with new rubbers. The bike started before i removed the carbs, there was a fuel leak from carb 2, which apared to be from a cracked rubber (between engine and carb) thats why they were replaced. Before this starting it had stood for about 5 months as i did all the other work. Only took some fresh fuel and a few prods of the starter and it stated and idled well.

Not sure how much its worth and i'm affraid to add up how much i've spent.
Thanks
J

[alexb]

PM'd ya mate.