what is a typical rear wheel nut size ? on a sports600

[colin1]

i dont wanna buy a complete socket set, so im just gonna get about 3 sockets off ebay that are likely to be right

if anyone knows the size for a tt600, great
kawasaki zx6r probably next best, otherwise, any sizes of other sports 600 wheel nuts appreciated.

yes i can measure it, but my measuring wont be very accurate.
____________________
colin1 is officially faster than god

[G]

Your measuring will be accurate enough, I would have thought.

Got a feeling the TT may be an odd size.
J model ZX6 is 32mm.

I got myself a 19-50mm 3/4" drive socket set for not that much from ebay, especially as it came with a decent size breaker bar which I also wanted.

I needed a 36mm socket which cost a few quid, so it made sense to get the set (and I always wanted an extra-big chunky tool! ).

[Kickstart]

Hi

Generally a 24, 27 or 30, but there are always exceptions (such as the RS125 which is 25mm, a size that no general motor factors shops stock).

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[colin1]

my measuring got 28 mm so i'll order a 28mm (and a 25mm for my rs125) and if it doesnt fit i'll try a 27 or a 32

thnks
____________________
colin1 is officially faster than god

[Bendy]

The CBR is a 27 I think, and since the TT6 is a blatent copy it may well be the same.

[G]

Ok, maybe your measuring isn't that great .

Suspect it is 27mm which is a lot more likely size.

[True Blue]

GSXR 600 K1-K4 is a 36mm nut if it helps.
____________________
Past >>>> Honda NSR 125 >>>> Suzuki GSXR 600 K1 >>>> Suzuki GSXR 600 K4 >>>>Kawasaki Z1000 DAF >>>>Suzuki RMZ 250 >>>> Current >>>> KTM Superduke R 1290 >>>>

[colin1]

[Bendy]

Race cans only come in about three different link pipe sizes, so it's no surprise that one fits. CBR footpegs fit a TT6, I know, and the Triumph fork seal tool was a perfect fit for my CBR forks.

However, I was really making reference to the visual similarities, the TT600 looking like a CBR600 that's been left next to the radiator for a little too long.

[colin1]

i think the yellow and black tt600 looks a bit like the yellow and black cbr600 you have, but i like the yellow on the cbr600 better
____________________
colin1 is officially faster than god