NSR125RS refusing to go over 80 on the flat?

[YellowNSR]

Help!

any ideas are welcome...

right the bike is an italian import 1996, it's got a full arrow system, just been rejetted (138,65,42), carbon reeds, no restrictor in the carb intake, standard airbox, TV-78, and CDI626 + BR9EIX spark plug...

SO why is it refusing to go over 80mph???? could it be the gearing?

I'm considering taking it to get dyno'd and set up correctly, but before i do i was going to check that i'm not missing anything obvoius....

Cheers

Chris

[T1z3R]

lose some weight
____________________
duck my sick!

[code guru]

mine hits 90 and could go more but have u checked 2 c wot sprokets u got?
i got a similar set up but with out the reeds with std gearing.
check 2 c if your p/v is working. thats wot it think the problem might be

[alains]

i suppose you have download my file , so look at page 9 and check the valves sequence and control if your valves open completly . your problem , for my point of view it's a valves problem
and for T1Z3R , if all idiots were flying you should be wing commander
____________________
the worst day fishing is better than the best day working