help need asap please look!

[lee125]

hi i took my carb off my dt 125 this morning to check jet sizes but when i took it off the bar that attaches to those box things on the float bent slightly :@ and when i put it all back together and turn petrol on it all comes pissing out of the overflow pipe and biek ticks over quite high so thats an air leak but im puzled at why petrol is pissing out have i fucked the float? :@ :@ any help willl be much appreciated thanks
____________________
cbt passed 01/07/2006 bike:92 dt 125 and 96 honda cr 250
theory:PASSED! A2 test:PASSED 08/11/2006 restricted to 33bhp for 2 years

[0ddball]

You need to set the float height back to the book value by bending the little tab that the float needle hooks onto. Either that or you've put it back together wrong somehow.

[lee125]

seems to be sorted now after i bent it back
____________________
cbt passed 01/07/2006 bike:92 dt 125 and 96 honda cr 250
theory:PASSED! A2 test:PASSED 08/11/2006 restricted to 33bhp for 2 years