Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


What? Another VFR

Reply to topic
Bike Chat Forums Index -> Show & Tell Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next
View previous topic : View next topic  
Author Message

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 08:08 - 24 Feb 2012    Post subject: What? Another VFR Reply with quote

Since going mad on my other project nc30 I reckon that there's enough spares in my garage to build another nc30.
I want a 'clothes horse' to wear my fairing, for whenever it goes off to get painted, to save taking me taking the main project off the bench too.

The plan is to build it to a nice standard without going too OTT and try and use as many of my spares as possible.

This is how far I've got.

The old bottom yoke has been bead blasted and zinc coated (new headstock bearings and seals though).
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0664.jpg

Swingarm spindle and nuts etc bead blasted and zinc coated.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0670.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0668.jpg

Spare swingarm cleaned up quite nicely and all torqued up
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0667.jpg

Old hub came up well too, very minimal damage to the teeth and the bearings feel fine.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0671.jpg

The pinch bolt (blasted and zinc'd) that was for my main project until Kayla and her titanium temptation came along.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0672.jpg

Caliper hanger, has a tiny bit of corrosion that I couldn't get rid of.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0673.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0675.jpg

My old kick stand, I cut the mount for the rubber off, too bent and rusty to save. It will be stripped and zinc'd. The fairing mount has a tiny crack in it too, so that will get welded.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0677.jpg

And this is how she sits at the moment.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0678.jpg

But not for too long, I want my bench back! Lots of parts are getting zinc and anodising and I have all the front and rear suspension with wheels so hopefully she be rolling quite soon.

Hi, my names Tim and I'm a Hondaholic
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 09:33 - 24 Feb 2012    Post subject: Re: What? Another VFR Reply with quote

https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0678.jpg

Nice idea for the tool board, (spray paint over the tools to get an outline of where to put them back) - will steal that for myself Thumbs Up .


Oh and cool project Wink !
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dr. DaveJPS
World Chat Champion



Joined: 24 May 2008
Karma :

PostPosted: 10:20 - 24 Feb 2012    Post subject: Reply with quote

so where's the Hondzuki then.... Neutral ? Wink
____________________
"intelligent inattention is preferable to unintelligent tinkering"
www.davejps.com
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 11:05 - 24 Feb 2012    Post subject: Reply with quote

Dr. DaveJPS wrote:
so where's the Hondzuki then.... Neutral ? Wink


Stripped of its vfr parts and sold on the bay, just waiting for the buyer to collect
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 14:14 - 25 Feb 2012    Post subject: Reply with quote

Few more spares to be cleaned up for the project

https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0702.jpg

https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0700.jpg
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 17:45 - 29 Feb 2012    Post subject: Reply with quote

Bit more to add
Shock linkage blasted, zinc'd and rebuilt
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0721.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/image.jpg
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts
Alpha-9 This post is not being displayed because it has a low rating (Spam). Unhide this post / all posts.

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 18:35 - 01 Mar 2012    Post subject: Reply with quote

Got the parts back from Star anodising
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0723.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0725.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0727.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0728.jpg

Few more bits from the zinc coaters
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0730.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0732.jpg

So heres what I did today
Cleaned up the shock linkage and fitted it all
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0734.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0736.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0738.jpg

Also fitted the brake torque arm and a few other brackets
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0740.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0743.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0745.jpg

Waiting on more zinc coating and me painting the rear disc now
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Frost
World Chat Champion



Joined: 26 May 2004
Karma :

PostPosted: 19:32 - 01 Mar 2012    Post subject: Reply with quote

I hope you make a better job of this one than that dodgy pile of crap you bodged together in your last build. Wink
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 17:53 - 03 Mar 2012    Post subject: Reply with quote

I know, what a shed that bike is Wink

Rooted around for a chain guard but I dont have one so I decided to make one. This was the biggest bit of ally I had, so I made a template to suit.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0747.jpg

All cut and bent to shape, just the holes to drill now.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0752.jpg

All fitted, drilled and tapped the swingarm to mount the other side.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0758.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0755.jpg

Just needs a lick of paint now

Also lashed up a sharkfin guard but that needs some spacers turned up to fit that
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 19:42 - 03 Mar 2012    Post subject: Reply with quote

Here it is painted along with the shark fin, might redo it though, the lightning holes didnt really go to plan Neutral
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0760.jpg
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Frost
World Chat Champion



Joined: 26 May 2004
Karma :

PostPosted: 22:14 - 03 Mar 2012    Post subject: Reply with quote

Another bodge job Rolling Eyes












Laughing Bet you could sell a few of those on 400grey bike Wink
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 09:08 - 07 Mar 2012    Post subject: Reply with quote

Got some bolts and fixings back from the zinc coaters,

Now useable yokes
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0764.jpg

Only missing a rear sprocket
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0771.jpg

The shaft has only loosely been put in as I've not finished the rear disc yet.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0765.jpg

Put in an old shock to get it rigid
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0773.jpg
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0774.jpg

Cleaned up the forks and this is how she sits atm
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0778.jpg
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

garth
World Chat Champion



Joined: 15 Dec 2004
Karma :

PostPosted: 09:51 - 07 Mar 2012    Post subject: Reply with quote

Sell me this when you're done?

If I'd even fit on it Laughing
____________________
You ain't a has been if you never was
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 13:30 - 07 Mar 2012    Post subject: Reply with quote

Where do you get your stuff zinc'd? How much is it?
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Joncrete Cungle
World Chat Champion



Joined: 31 Jan 2012
Karma :

PostPosted: 15:12 - 07 Mar 2012    Post subject: Reply with quote

Great stuff!!!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 15:55 - 07 Mar 2012    Post subject: Reply with quote

Cheers all

It's actually quite cheap, its only cost £30 in zinc for everything for this bike so far plus some extras. Bare in mind I get a good finish by media blasting all parts before getting them coated.
Its a small firm not far from where I work, dont even know their name, I just drop in every few days.
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 18:36 - 10 Mar 2012    Post subject: Reply with quote

Seeing as it going to be a trackbike with a daytime MOT I made use of the spare keyless ign barrel and smashed lhs switchgear .

I will wire the ign up as a flick switch
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0790.jpg

The only wires left from the switch gear are for the horn (needed to be road legal) and clutch switch.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0792.jpg

Organised the garage to have a spares stock check too
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0786.jpg
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

alun111
World Chat Champion



Joined: 31 May 2007
Karma :

PostPosted: 21:05 - 10 Mar 2012    Post subject: Reply with quote

You sir have owned too many VFR400s!
____________________
Summer: '00 Honda CB600F Hornet
Winter: '93 Suzuki GSF 400 Bandit VP Variable Valve
Past Bikes: Lifan LF100-5 Lifan LF125-A Honda C70
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 16:59 - 12 Mar 2012    Post subject: Reply with quote

Nah Cool

Got the new ign switch wired up, the earth is for the led in the switch so it lights up green when the bike is turned on. Just need to make a mount for it to go on the top yoke now.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0795.jpg

I did test it on a bike and it turns everything on but the battery died before the motor fired up. Didnt see any resistors or diodes when I took the barrell apart so it should work fine.
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :

PostPosted: 18:05 - 12 Mar 2012    Post subject: Reply with quote

Star Anodising have done quite a few bits for me over the years.Bill the Boss is a biker so makes sure that the job is done well.

This latest project is coming along nicely Tim.Good to see the same meticulous attention to detail as your other projects.
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 19:43 - 20 Mar 2012    Post subject: Reply with quote

Cheers Thumbs Up . Yeah Bill does seem spot on, took real time to answer all my questions, and made it quite clear not to bead blast anything thats to be anodised in the future Embarassed

Got a few hours in and got a friend to weld a plate into another spare top yoke for the new ignition switch. It will go off to the anodiser's and will the replace the one that is on the bike.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0798.jpg

Painted the rear disc, so I got that fitted.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0815.jpg

As well as the rear caliper, and I also found a braided brake line and fittings.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0819.jpg

All the front fixings zinc coated
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0817.jpg

How the bike stands now, the rear wheel is just placed next to the bike.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/IMG_0825.jpg
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 00:13 - 21 Mar 2012    Post subject: Reply with quote

Great work Thumbs Up

It's good to see someone that doesn't skimp on any part of the bike! So many people just skip over stuff but your attention to detail is really something to follow.

Keep it up!
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tim..
World Chat Champion



Joined: 11 Oct 2006
Karma :

PostPosted: 17:39 - 24 Mar 2012    Post subject: Reply with quote

Cheers Thumbs Up

Bolts for the side stand arrived, had to buy those. Honda love their fine threads Rolling Eyes .
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/image1.jpg

Now I have a rolling chassis. Am waiting on a few bits from the anodisers now, clip ons etc.
https://i475.photobucket.com/albums/rr119/Timon1983/VFR%20nc30%20trackbike/image-1.jpg

Want a decent rear shock, dont want to pay for it. Anyone got one they want to swap for some spares, I have lots (not the type 8 fairing though, thats staying with me).
____________________
Project builds: My VFR400 nc30 build thread + Honda Britain Rep VFR + What? Another VFR +Project 'cos I want one' + V8 coffee table
www.marshallracing.co.uk
OCD - Helping to bring the standard of my bikes up and make me slowly go mad since 1999
 Back to top
View user's profile Send private message You must be logged in to rate posts

Redoko
World Chat Champion



Joined: 04 Nov 2009
Karma :

PostPosted: 17:54 - 24 Mar 2012    Post subject: Reply with quote

Pass the popcorn

Brilliant project. Clapping
____________________
"Let's face it, this is not the worst thing you've caught me doing."
Sudika Sportsman SK50QT > Gilera DNA50 > Honda CBR125 RW7 > Kawasaki Zephyr750 > Suzuki GSXR600 > Honda Hornet CB600F '51
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 224 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Show & Tell All times are GMT + 1 Hour
Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9  Next
Page 1 of 9

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.32 Sec - Server Load: 0.15 - MySQL Queries: 16 - Page Size: 155.68 Kb