LED Indicators

[short1uk]

How would I go about fitting these? I have a had a look and I can see the wire running in to the current (huge) indicators.

I would be looking at fitting some of the arrow motrax ones or something similar.

Any one any ideas?

Thanks

C

[short1uk]

and are they any good? Bright?

Any pics anyone?

[passion]

[Itchy]

expensive easy way , replace indies and fit a £15 Honda replacement relay , avalible from motrax ,

cheapo way , fit indies but install some kind of resistor to increase the load to get the correct flash rate (as LEDs have a lower reistabce and hence flash faster).

the tiny ones are not so bright the bigger ones are fairly bright , but since I've never seen them side by side , its hard to compare also human eyes are attenuated to see movement , and lights flashing immitate this effect.
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.

[short1uk]

[bunglehaze]

have a look on fleabargain for the load resistors, if you search for led indicator bulbs the chappie selling them does resistors for a fiver I think, if you get stuck let me know and I will pop a link up.

cheers

leigh
____________________
https://bikechatter.net
Motorcycle Products Reviews and News
06 - ZZR600 > 07 - ZX6R J1 > 08 - ZX6R J2 > 09 - ZX636 A1P > 11 - ZX10R C1H

[irving]

[timjim]

I fitted the led indicators from Motrax to a 600 Bandit and they are bright with a capital B!!!!!!they did flash fast ,but was cued by fitting the universal relay from Motrax which just plugs in place of the oe relay.