Brembo Rear Master

[JpWard]

Discovered today that my rear master looks like it is on its way out and Yamaha are quoting silly prices! and dont do a seal kit on its own.

After looking seams like a lot of Ducati stuff is same or similar fitment as in 40mm centres 90o remote res and side exit

10.4776.12 is the closest part number in the goldline range i could find but mine has 4769 stamped on it

Does anyone know where to get either cheap Brembo master complete or a seal kit?

For SZR660 Yam

Thanks

[Kickstart]

Hi

Brembo generally will not sell seal kits for product liability reasons. You best bet is to hunt round for a 2nd hand one.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[sickpup]

The only Yamaha master cylinder I have listed is the 96-99 R1/R6 at around £40 complete and new.

There is no listing for a seal kit for the SZR660 front or rear but I will check next time I order.

If you post a pic of the master cylinder I may be able to match it to something else.

[JpWard]

Click here

https://www.bevelheaven.com/stuff-for-sale-master-cylinders.htm

Its the last one i took a look and i think it will fit on ok as 40mm hole centres an R1/R6 cylinder is very different in that it has one hole at the end of the cylinder not on the side,

So anyone know who's good for discount brembo and i dont mind if i have to pay for full cylinder rather than repair kit [/img]

[Zimbo]

This is the best place I know for Brembo stuff

https://www.gprdirect.com/epages/GPRDirect.storefront/456c994700396b5e2717d9c7b805068a/Catalog/1227

Most Ducati rear calipers are only about £40 - £45 new.