Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Baffles....Baffled !!

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

greatmoorred
Nearly there...



Joined: 13 Jul 2005
Karma :

PostPosted: 18:19 - 02 Apr 2007    Post subject: Baffles....Baffled !! Reply with quote

My 400 Bandit is going in for its MOT on Saturday, its got a race can on it so i thought it would be a good idea to go and see my mechanic today. He told me to grind off the "for race use only" which is stamped into the end can and put in some baffles.
Heres the rules though, if i put the baffles in to reduce the noise, but leave the wording stamped on then it will fail automatically, grind the writing off and it will pass Shocked
Anyway, took it for a spin with the baffles in and even though it was much quieter, they dont seem to affect performance too much around town. Very Happy
I might even leave them in and save my ears.
 Back to top
View user's profile Send private message You must be logged in to rate posts

MattEMulsion
World Chat Champion



Joined: 29 Aug 2004
Karma :

PostPosted: 18:31 - 02 Apr 2007    Post subject: Reply with quote

The MOT regulations changed the other year.

Basically speaking as long as the can doesn't have 'not for road use' or something similar stamped on it, and in the testers opinion it isn't louder than what a standard can would be on the same bike, then he can legally pass it.

If anyone tells you that exhausts have to be 'E' or 'BS' marked to pass an MOT then they are wrong.
____________________
Yamaha YZF-R6
 Back to top
View user's profile Send private message You must be logged in to rate posts

-Savage-
World Chat Champion



Joined: 10 Jun 2005
Karma :

PostPosted: 19:28 - 02 Apr 2007    Post subject: Reply with quote

MattEMulsion wrote:


If anyone tells you that exhausts have to be 'E' or 'BS' marked to pass an MOT then they are wrong.


yea, my cbr standard can has NO markings on it at all! so it obviously doesnt need any fancy marks etc. Thumbs Up
____________________
My Bikes - - - Royal Enfield 500 with sidecar, VFR800, CBR600FX,
Peugeot Speedfight 100, Kymco Hipster 125, GSXR750K5, Jawa TS 350
 Back to top
View user's profile Send private message You must be logged in to rate posts

Wafer_Thin_Ham
Super Spammer



Joined: 18 Nov 2005
Karma :

PostPosted: 19:47 - 02 Apr 2007    Post subject: Reply with quote

The can on my dad's hornet is properly loud, but again no stamps Thumbs Up
____________________
My Flickr
 Back to top
View user's profile Send private message You must be logged in to rate posts

Visitor Q
$25 whore



Joined: 30 Apr 2004
Karma :

PostPosted: 00:28 - 03 Apr 2007    Post subject: Reply with quote

I have my mot tomoro. Im thinking of wedging wire wool down it as apparently that works for a good few hours before it gets blow out.

Visions of some mechanic picking it out of his face (or some following cager Twisted Evil).

But i still have a cracked screen which worries me. Like severely cracked and jagged.

Long story short subframe bent in a crash, pushing in fairing if mirror is on which catches choke. So ive removed mirror and put spacers on fairing, but it means i cant put on my old screen. And current is missing a good few inches from the left hand side, so at last mot they ranted about me losing my hands in future.

But MOT is for roadworthyness not vanity surely... Thinking

I might go buy some ducktape and put rubber over it for the MOT
____________________
China traffic/travel bike vid - When I make a sweeping statement, please add the word 'statistically' in to the sentence before you bitch...
From September 2014 to January/February 2015 I will not be using any English, nor reading any. As such, I won't be on here. PM at will, but I won't be checking/posting unless in emergencies. Certainly not for the first couple of months. Please berate me savagely if I break that rule...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MattEMulsion
World Chat Champion



Joined: 29 Aug 2004
Karma :

PostPosted: 21:33 - 03 Apr 2007    Post subject: Reply with quote

bonny_ricardo wrote:
But MOT is for roadworthyness not vanity surely... Thinking


True, but a cracked and jagged screen may be considered as posing a danger to you or others in the event of a collision. Its the same with a car, you can't get an MOT pass if you have a great jagged split in your wing etc.

At the end of the day it depends on how bad it is, but it may be worth patching it up beforehand to save getting a failure for it.
____________________
Yamaha YZF-R6
 Back to top
View user's profile Send private message You must be logged in to rate posts

Visitor Q
$25 whore



Joined: 30 Apr 2004
Karma :

PostPosted: 23:09 - 03 Apr 2007    Post subject: Reply with quote

MattEMulsion wrote:


At the end of the day it depends on how bad it is, but it may be worth patching it up beforehand to save getting a failure for it.


Lol i took a great picture on the phone but sadly cant upload it (without ALOT of agro), but i cut a strip in two blocks of pink foam and selotaped them on. Looked comfy.

And the wire wool worked a treat. Im waiting for it to shotgun out at random on a ride though Thinking

It passed by the way, only advisory was wheel alignment, which was only cos i rushed putting the wheel on yesterday.
____________________
China traffic/travel bike vid - When I make a sweeping statement, please add the word 'statistically' in to the sentence before you bitch...
From September 2014 to January/February 2015 I will not be using any English, nor reading any. As such, I won't be on here. PM at will, but I won't be checking/posting unless in emergencies. Certainly not for the first couple of months. Please berate me savagely if I break that rule...
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 19 years, 133 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.19 Sec - Server Load: 1.02 - MySQL Queries: 13 - Page Size: 55.82 Kb