massively ambitious NC35 idea.

[Timmeh]

'lo.

Now that I'm the proud owner of a freshly ruined RVF, it's time to spend the money on it that I should have just saved and got one that hadn't been stacked a few times. duh.

So, cue the carbon fibre, HRC bits and all the other performance mods you could possibly throw at it.

First question is could you fit a CBR600RR front end (forks, brakes, wheel) to it? And if you could, would it handle better or worse?

Second question is a centre-up exhaust feasible? I was going to use the tyga rear end as a template, although I'd be getting a modified carbon fibre version made up by a mate who makes bits for F1 cars.


____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you

[andrew]

Ay op timmeh, i don't think the CBR600RR would be much of an improvement over the stock RVF front-end. I'd save the money and get a set of Ohlins springs and get the front forks set up properly.

What happend to the GSXR4?

[Timmeh]

ello duder

I hear ya on the front. However if I had RR forks I could go for a hefty big-brake option a la RCV. Plus. it would look cooler.

The gixxer's still around; still haven't managed to get the fork seals changed, and the engine failed a compression test thanks to being run around with the fuelling wrong. At best it's a new set of rings and worst it's a rebore and a set of oversize pistons to get it working properly, which is a real shame. Maybe next summer I'll get it going again.

Hows the business doing?
____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you

[hmmmnz]

you could fit any front end to any bike you wanted.... with a bit of work, you may need the complete front end including the yokes,
you may have to press the stem from your yoke and the cbr yoke, and swap them over, (im not sure if either are steel or ali yokes)
i did a gsxr front end onto a gs500 with out too much bother.
i say go for it
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Timmeh]

any front end you say?

cool, I'll have an Aprilla MX50 front and a '98 R1 rear.

Now I just have to find a broken RR and rescue the front.

sweet.
____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you

[hmmmnz]

lol, with in reason lol, say any bike larger or the same size will fit with out too much bother
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Deano]

hello,
where have you been lately?
the cbr600rr front end has been done. and a guy in a US is currently running one in his race series and he is leading it at the moment racing ducati 800's although he has a je big bore like me.
he seems to be OK with them and hasnt complained once.

but its up to you.

you'll have to show me those bits your mate makes and we'll have a race on the v4's

[Timmeh]

'lo dean!

yah, been well busy mate. Work and that.

Still, hopefully will have a few weekends spare soon so I'll have to pop round and see yer.


____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you

[Wafer_Thin_Ham]

[Deano]

[Wafer_Thin_Ham]