GSXR750WP Wireing!

Jenks · World Chat Champion Joined: 22 May 2006 Karma :

Right okay, How do i fit the wiring loom to the bike?

is it true that no 2 connectors are the same?

(Some silly bugger has fitted a nice alarm and absolutely buggered the loom up, so it was ripped out! - so i dont have the old one to work from!)

any tips? pics? hints?

Thanks.

Jenks.
____________________
1978 MZ TS 250 1 Supa 5
1992 yamaha fzr1000 exup
1998 aprilia af1 sintesi

NSR Mick · World Chat Champion Joined: 26 Jun 2005 Karma :

If you get another loom and have any mechanical sense it becomes self explanatory. Thumbs Up

____________________
If you dont like the way that I ride.......Stop trying to keep up!!!

Kickstart · The Oracle Joined: 04 Feb 2002 Karma :

Hi

Often some connectors will be the same. Also make very sure you have the loom for your exact model of bike. Eg, Yamaha swap the order of some of the wires in the connectors between models, so although it all plugs in nothing works. Took ages to find that problem with the FZ750.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

Jenks · World Chat Champion Joined: 22 May 2006 Karma :

yep i have one on order, from the same model and year!

ill have to see when it comes!
____________________
1978 MZ TS 250 1 Supa 5
1992 yamaha fzr1000 exup
1998 aprilia af1 sintesi

Whosthedaddy · Super Spammer Joined: 11 Dec 2005 Karma :

I removed the loom from the FZR, but in doing so I took loads of pics to try and remember where each of the connections went. In all fairness I didn't seem to take the pics that would have helped, but it is quite self explanatory.

Just start with the simple things, get the large electrical components attached and then by process of elimination it should start to make sense.

It might be worthwhile giving the new loom a decent clean and a new wrap of electrical tape as to prevent loose wires or maybe even a short.

The hardest thing that I found was routing. Many a time I had to remove or reroute the loom as an over instead of an under makes a whole world of pain (in the ass)
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy