r6 Sump removal

[Smiffy1203]

hey there, i fooked up the other day while trying to service the bike in a rush and i stripped the thread out of the sump! i have tried to re-tap the thread with no joy and found a few sumps on e-bay for £30ish... i was just wondering how much of a job removing the sump would be? im guessing the exhaust will have to come off so is there a new manifold gasket i will have to get and is there anything else i will need to replace after removing any parts?
Thanks guys
____________________
Yamaha YZF-R6
Knee down vid..... https://www.youtube.com/watch?v=W2yOFSDYUN4
Clicky..... https://i75.photobucket.com/albums/i320/smiffy1203/a009_1.jpg

[G]

Exhaust will have to come off. Personally I wouldn't bother with new exhaust gaskets.

Should be worth considering a new sump-gasket, though you might be able to blag that too if you're careful.

[Smiffy1203]

cheers m8y
____________________
Yamaha YZF-R6
Knee down vid..... https://www.youtube.com/watch?v=W2yOFSDYUN4
Clicky..... https://i75.photobucket.com/albums/i320/smiffy1203/a009_1.jpg

[Cannon]

Oxyacetalene and a hammer
____________________
Staffs Riders Forum

[Smiffy1203]

haha cheers cannon!
____________________
Yamaha YZF-R6
Knee down vid..... https://www.youtube.com/watch?v=W2yOFSDYUN4
Clicky..... https://i75.photobucket.com/albums/i320/smiffy1203/a009_1.jpg

[TUG]

When i did the sump on my FZR it was pretty easy, undo all the bolts and undo the oil sensor and fit new one using either a gasket or instant gasket. piece of pish.
____________________
Haz ER-5, innit!