Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


ZX6R J2 - Removing the swingarm

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

PoorbandTony
L Plate Warrior



Joined: 08 Apr 2007
Karma :
PostPosted: 19:25 - 15 Mar 2008    Post subject: ZX6R J2 - Removing the swingarm Reply with quote
Hi,

I have a small dilemma - I want to remove the swingarm to take the chain off (endless), and although I have a paddock stand that's not going to help (something which I realised upon removing the rear wheel - doh!).

In order to do this - is there a centre stand I can get, or has anyone any advice on how to tackle this without the bike falling on it's backside?

Thanks in advance!
Tony
 Back to top
View user's profile Send private message You must be logged in to rate posts

Whosthedaddy
Super Spammer



Joined: 11 Dec 2005
Karma :
PostPosted: 19:34 - 15 Mar 2008    Post subject: Reply with quote
https://www.bikechatforums.com/files/fzr600_040.jpg

Axle stands are a mans best friend.

If its just to take the chain off then just use an angle grinder or chain splitter.
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy
 Back to top
View user's profile Send private message You must be logged in to rate posts

Itchy
Super Spammer



Joined: 07 Apr 2005
Karma :
PostPosted: 19:38 - 15 Mar 2008    Post subject: Reply with quote
I almost said Abba Stand but Abba stands work on your swingarm bearing mount things, and thus will be of no help.

Perhaps you can tie it from a roof beam which I did for my NTV once , or maybe get a car jack on the engine sump using a piece of wood to prevent the jack making holes in your sump.



YMMV and I take NO responsibility for any breakages! ,
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Whosthedaddy
Super Spammer



Joined: 11 Dec 2005
Karma :
PostPosted: 19:44 - 15 Mar 2008    Post subject: Reply with quote
Itchy wrote:
or maybe get a car jack on the engine sump using a piece of wood to prevent the jack making holes in your sump.


If the pegs are solid then use them as jacking points or twist them upside down and then use them
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 19:58 - 15 Mar 2008    Post subject: Re: ZX6R J2 - Removing the swingarm Reply with quote
Would seem to make more sense just to get a chain splitter Confused.
 Back to top
View user's profile Send private message You must be logged in to rate posts

PoorbandTony
L Plate Warrior



Joined: 08 Apr 2007
Karma :
PostPosted: 20:03 - 15 Mar 2008    Post subject: Reply with quote
Whosthedaddy wrote:

Axle stands are a mans best friend.

If its just to take the chain off then just use an angle grinder or chain splitter.


I've a couple of axle stands but I don't think the frame on the ZX will work with that, your bike looks a perfect candidate!

I did think about the rafter idea, along with a jack and wood under the sump, but I'm worried about the whole balance of the bike and I'm not sure my garage rafters are up to the task should things go wrong Wink

I'll have a look tomorrow again and see which options will work - thanks for all the tips!
 Back to top
View user's profile Send private message You must be logged in to rate posts

PoorbandTony
L Plate Warrior



Joined: 08 Apr 2007
Karma :
PostPosted: 20:07 - 15 Mar 2008    Post subject: Re: ZX6R J2 - Removing the swingarm Reply with quote
G wrote:
Would seem to make more sense just to get a chain splitter Confused.


I did to start with but the whole area around the swingarm into the front are cacked in crap and oil as when I got it they'd fitted an over-zealous scottoiler. Plus I've got to drill out a knackered screw for the rear hugger and I've not the room with the arm fitted.

I've also been told that I should only use an endless chain with the ZX6R - is that true or is my mate talking out of his exhaust?
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 20:24 - 15 Mar 2008    Post subject: Re: ZX6R J2 - Removing the swingarm Reply with quote
Endless chains probably means a rivet chain rather than splitlink. Never seen an 'actual' endless drive chain for a bike (though sure they do exist in some form).

The oil and stuff is a protective layer against corrosion so is fine where it is Very Happy Razz.
 Back to top
View user's profile Send private message You must be logged in to rate posts

timjim
Trackday Trickster



Joined: 31 Aug 2006
Karma :
PostPosted: 20:31 - 15 Mar 2008    Post subject: chain Reply with quote
disc cut or grind the old chain off,use a split link once the new chain is on..rid to your local bike shop and get them to rivet it for ya....5-10 quid max!!!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

PoorbandTony
L Plate Warrior



Joined: 08 Apr 2007
Karma :
PostPosted: 20:43 - 15 Mar 2008    Post subject: Re: ZX6R J2 - Removing the swingarm Reply with quote
G wrote:
Endless chains probably means a rivet chain rather than splitlink. Never seen an 'actual' endless drive chain for a bike (though sure they do exist in some form).

The oil and stuff is a protective layer against corrosion so is fine where it is Very Happy Razz.


Good point - never thought of it like that. I think the chain definitely has to go though as I've a feeling it's stretched - when riding at moderate speed there's an odd sound (hard to explain, like a repeating 'yow-yow-yow' which gets faster in proportion to the speed).

Being honest this is probably the biggest thing I've done with a bike so the bravado in me wants to take it apart, but the sensible part is quietly thinking leave it alone! Very Happy

The swingarm removal looks unlikely now though, so I think I'll go the sensible route and just fit a new chain.

Thanks again everyone!
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 20:57 - 15 Mar 2008    Post subject: Re: ZX6R J2 - Removing the swingarm Reply with quote
If the chain's going, then as above, a grinder, saw or other metal cutting device will be fine in lieu of a proper chain tool.

If you had your location in your profile we could see where you were - if you're near reading, I'm sure we could arrange the use of my chain splitter/riveter.
 Back to top
View user's profile Send private message You must be logged in to rate posts

PoorbandTony
L Plate Warrior



Joined: 08 Apr 2007
Karma :
PostPosted: 21:53 - 15 Mar 2008    Post subject: Re: ZX6R J2 - Removing the swingarm Reply with quote
G wrote:
If the chain's going, then as above, a grinder, saw or other metal cutting device will be fine in lieu of a proper chain tool.

If you had your location in your profile we could see where you were - if you're near reading, I'm sure we could arrange the use of my chain splitter/riveter.


Thanks for the offer - unfortunately I'm stuck in the fens! There's a couple of good bike garages right near me though, so I'll just pop in there - I'm guessing it'll take all of 5 minutes for them to rivet the join. Cheers!
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 18 years, 1 day ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.09 Sec - Server Load: 0.62 - MySQL Queries: 13 - Page Size: 75.11 Kb