wheel bearings

[JAMSXR]

Need some new one's for my rear wheel, what is the sort of run of the mill price for them fitted?

I would have thought its fairly easy to do, but being about as mechanically minded as a chicken i have no idea?
____________________
Honda SFX50 > Aprilia SR125 > Aprilia RS125 > Honda RFV400 > K4 GSXR600 > KTM Duke > C1H 636 > K3 GSXR1000 > Aprilia RSV-R > Triumph Street Triple R > Ducati 899 Panigale > Aprilia Tuono 1100 > Triumph Daytona 675R > KTM SuperDuke 1290 2.0

[doggone]

They aren't expensive but from your declared ability, best let a mechanic do them.
You could buy them mail order from such as M&P, take the wheel out and any garage would fit them. in about 30 minutes.

[JAMSXR]

____________________
Honda SFX50 > Aprilia SR125 > Aprilia RS125 > Honda RFV400 > K4 GSXR600 > KTM Duke > C1H 636 > K3 GSXR1000 > Aprilia RSV-R > Triumph Street Triple R > Ducati 899 Panigale > Aprilia Tuono 1100 > Triumph Daytona 675R > KTM SuperDuke 1290 2.0

[hmmmnz]

what bike is it for??
if you take the wheel off and take it to the bike shop the whip out the bearings for you in a second,
if you take the whole bike to them then they are going to charge you for taking the wheel off ect and will probably take them all day, if they even have time to do it for you.

its not hard to get the bearings out yourself but sometimes getting the first one with a drift is a pain in the arse,

but getting them in is childs play,

____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[JAMSXR]

K3 1000, it need's a service before i sell, and i know it needs to be done.
____________________
Honda SFX50 > Aprilia SR125 > Aprilia RS125 > Honda RFV400 > K4 GSXR600 > KTM Duke > C1H 636 > K3 GSXR1000 > Aprilia RSV-R > Triumph Street Triple R > Ducati 899 Panigale > Aprilia Tuono 1100 > Triumph Daytona 675R > KTM SuperDuke 1290 2.0

[iooi]

Lets just say, that i had mine done, wheel off. Including bearing all 3 off them and fitting was sub £30.
Mainly thanks to the fact they only charged for 10 min labour, which was all it took and not a whole hour.
____________________
Just because my bike was A DIVVY, does not mean i am......

[MarkJ]

I had both bearing in my rear wheel and my sprocket carrier bearing changed for £25 including the price of the bearings