Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


2004 DT 125 RE owners or other DT owners, question please

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

zetecy
Renault 5 Driver



Joined: 06 Apr 2008
Karma :
PostPosted: 20:22 - 07 Apr 2008    Post subject: 2004 DT 125 RE owners or other DT owners, question please Reply with quote
hi, i am new to this forum so hello!
I just bought a 2004 DT 125 RE today drove 400 miles return to get it! Seems ok at the moment, however, when i turn the ignition ON the oil light comes on which is normal right?
Then when I fire up the engine the oil light still stays ON,
Only untill i select first gear, does the oil light go OUT
I hope this is normal...

Also as many of you know 2 strokes need engine rebuilds regularly and the 2004 DT 125 that i just bought has done 7000 miles. How do i know if it needs a rebuild (piston and rings for example) my dad says he has compression tester, but its for car engines. hes not sure wether it will work for this 125cc bike? what testing do i need to do? (oh and the bike has not been derestricted (i.e 12-15hp)

many thanks and i look foward to using these forums!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

----
World Chat Champion



Joined: 29 Sep 2006
Karma :
PostPosted: 20:31 - 07 Apr 2008    Post subject: Reply with quote
Oil light is because it's low on 2 stroke oil.Fill it up..

Use the search button m8,this stuff has been covered many times Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

zetecy
Renault 5 Driver



Joined: 06 Apr 2008
Karma :
PostPosted: 20:37 - 07 Apr 2008    Post subject: Reply with quote
justmetoo125 wrote:
Oil light is because it's low on 2 stroke oil.Fill it up..

Use the search button m8,this stuff has been covered many times Thumbs Up


but how come the light goes out when first gear is selected? thats what i was asking is it normal?if it is normal then ive got nothing to worry about Smile. the oil tank is 3/4 full
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

cheekythomas
Crazy Courier



Joined: 06 Aug 2006
Karma :
PostPosted: 21:20 - 07 Apr 2008    Post subject: Reply with quote
On DT125s the oil light does stay on until the bikes put into any gear, so dont panic.... Wink
 Back to top
View user's profile Send private message You must be logged in to rate posts

TUG
World Chat Champion



Joined: 12 May 2007
Karma :
PostPosted: 21:23 - 07 Apr 2008    Post subject: Reply with quote
zetecy wrote:
justmetoo125 wrote:
Oil light is because it's low on 2 stroke oil.Fill it up..

Use the search button m8,this stuff has been covered many times Thumbs Up


but how come the light goes out when first gear is selected? thats what i was asking is it normal?if it is normal then ive got nothing to worry about Smile. the oil tank is 3/4 full

The light stays on to tell you the warning light is working.
____________________
Haz ER-5, innit!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ghettostan
Nitrous Nuisance



Joined: 25 Aug 2007
Karma :
PostPosted: 22:43 - 07 Apr 2008    Post subject: Re: 2004 DT 125 RE owners or other DT owners, question pleas Reply with quote
zetecy wrote:
hi, i am new to this forum so hello!
I just bought a 2004 DT 125 RE today drove 400 miles return to get it! Seems ok at the moment, however, when i turn the ignition ON the oil light comes on which is normal right?
Then when I fire up the engine the oil light still stays ON,
Only untill i select first gear, does the oil light go OUT
I hope this is normal...

Also as many of you know 2 strokes need engine rebuilds regularly and the 2004 DT 125 that i just bought has done 7000 miles. How do i know if it needs a rebuild (piston and rings for example) my dad says he has compression tester, but its for car engines. hes not sure wether it will work for this 125cc bike? what testing do i need to do? (oh and the bike has not been derestricted (i.e 12-15hp)

many thanks and i look foward to using these forums!


totaly normal Thumbs Up
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

----
World Chat Champion



Joined: 29 Sep 2006
Karma :
PostPosted: 22:43 - 07 Apr 2008    Post subject: Reply with quote
Sorry,i did'nt read the bit of your post about it going out when in gear Embarassed

Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

zetecy
Renault 5 Driver



Joined: 06 Apr 2008
Karma :
PostPosted: 15:19 - 08 Apr 2008    Post subject: Reply with quote
cheers guys i was really woorried i may have bought a dodgy one!

(dont worry justmetoo125 lol)

erm can anyone give me a quick answer to my second question Very Happy ?

thanks
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ghettostan
Nitrous Nuisance



Joined: 25 Aug 2007
Karma :
PostPosted: 16:04 - 08 Apr 2008    Post subject: Reply with quote
as for your second question...

when i bought mine i ask the seller when he last did a rebuilt and he said around 11/12,000miles, and when i got the bike it had about 21,000miles and when i reached 22k noticed my bike was loosing power and the head gasket was leaking so decided to do a top end rebuilt.

when i took the rings out, i noticed the bottom ring had snapped. so i defo had to get a top end rebuilt.

not sure it this really answers your question but there you go.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

element
World Chat Champion



Joined: 23 Jan 2006
Karma :
PostPosted: 18:44 - 08 Apr 2008    Post subject: Reply with quote
my re has done 18k miles on original bore, piston and rings. mines de-restricted too. 5k miles ago.. the topend is due for a rebuild now tho cos i can hear it knocking occasionally.. Ive always used fully synth (£12 a litre) oil and i dont over-rev it (bit hard without a rev counter like the older models).. the topend on these also last longer than the older DT's..

i
____________________
04' DT125RE (run-a-bout) // 89' DT125R (rebuilt + supermoto conversion)
SPARES FOR SALE. 2RK TZR // 82 DR125 // DT125R/E .... PM ME...
 Back to top
View user's profile Send private message You must be logged in to rate posts

zetecy
Renault 5 Driver



Joined: 06 Apr 2008
Karma :
PostPosted: 20:04 - 08 Apr 2008    Post subject: Reply with quote
Quote:
Posted: 16:04 - 08 Apr 2008 Post subject:



as for your second question...

when i bought mine i ask the seller when he last did a rebuilt and he said around 11/12,000miles, and when i got the bike it had about 21,000miles and when i reached 22k noticed my bike was loosing power and the head gasket was leaking so decided to do a top end rebuilt.

when i took the rings out, i noticed the bottom ring had snapped. so i defo had to get a top end rebuilt.

not sure it this really answers your question but there you go.


Quote:
Posted: 18:44 - 08 Apr 2008 Post subject:



my re has done 18k miles on original bore, piston and rings. mines de-restricted too. 5k miles ago.. the topend is due for a rebuild now tho cos i can hear it knocking occasionally.. Ive always used fully synth (£12 a litre) oil and i dont over-rev it (bit hard without a rev counter like the older models).. the topend on these also last longer than the older DT's..

i




Cheers for that guys, um well i dont feel/hear any unusual vibrations. its just on that website dtr125 https://www.dtr125.net/top-end-rebuildf.htm he says he did around 9000, mines done 7000 miles so just a lil unsure

just bout two new AVON tyres and mot, gear oil, coolant and kelvar gloves

and i need MORE money for a dep exhaust and silencer about 200! and if i buy a genuin piston kit from yamaha dealer is about £80. i got lots of bloody saving to do!. the exhaust on at the moment is standard, and is slightly flakey/rusty nearer the exhaust port. will it be easy to repaint in matt black or shall i just leave it. i also want to derestrict the exhaust which means disc cuttering it ahh! lol
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

element
World Chat Champion



Joined: 23 Jan 2006
Karma :
PostPosted: 13:14 - 10 Apr 2008    Post subject: Reply with quote
every exhaust for a dt will rot cos they dont make one in stainless and if u dont keep on top of it then it will rot within a year. i used to rub the rust down then use some rust treatment then paint with high temp matt black paint (halfords) but i was constantly doing it so now ive given up..I had 2 stock tailpipes in the space of 14 months. they just eat themselves!! your best bet is a dep since it has an alloy tail can (unless u go for the arrow which has a titanium end can.. oooeeer. same price too). also the dep/bigone front pipes are way lighter than stock but u soon find that out when u bin the bike on the expansion pipe side and find a whoooping dent. You would be hard pushed to dent the stock can..
____________________
04' DT125RE (run-a-bout) // 89' DT125R (rebuilt + supermoto conversion)
SPARES FOR SALE. 2RK TZR // 82 DR125 // DT125R/E .... PM ME...
 Back to top
View user's profile Send private message You must be logged in to rate posts

zetecy
Renault 5 Driver



Joined: 06 Apr 2008
Karma :
PostPosted: 21:15 - 10 Apr 2008    Post subject: Reply with quote
element wrote:
every exhaust for a dt will rot cos they dont make one in stainless and if u dont keep on top of it then it will rot within a year. i used to rub the rust down then use some rust treatment then paint with high temp matt black paint (halfords) but i was constantly doing it so now ive given up..I had 2 stock tailpipes in the space of 14 months. they just eat themselves!! your best bet is a dep since it has an alloy tail can (unless u go for the arrow which has a titanium end can.. oooeeer. same price too). also the dep/bigone front pipes are way lighter than stock but u soon find that out when u bin the bike on the expansion pipe side and find a whoooping dent. You would be hard pushed to dent the stock can..


yer mines pretty much rusted Sad flicks off when you tap it with a screw driver lol! so yer thanks for the advice, hopefully i can source a second hand dep or gianelli. any one know where i can get carbon fibre reeds? its a 2004 DT125RE. parts online seem quite hard to source!!

all the best
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

element
World Chat Champion



Joined: 23 Jan 2006
Karma :
PostPosted: 18:34 - 12 Apr 2008    Post subject: Reply with quote
[quote="zetecy"]
element wrote:
any one know where i can get carbon fibre reeds? its a 2004 DT125RE. parts online seem quite hard to source!!




ahh you've noticed how difficult parts are to find! I did know a place to get racing reeds. thing is my computer with all my bookmarks are at my ex's.... I'll keep u posted. may take a few days mind..
____________________
04' DT125RE (run-a-bout) // 89' DT125R (rebuilt + supermoto conversion)
SPARES FOR SALE. 2RK TZR // 82 DR125 // DT125R/E .... PM ME...
 Back to top
View user's profile Send private message You must be logged in to rate posts

zetecy
Renault 5 Driver



Joined: 06 Apr 2008
Karma :
PostPosted: 11:44 - 13 Apr 2008    Post subject: Reply with quote
Quote:

ahh you've noticed how difficult parts are to find! I did know a place to get racing reeds. thing is my computer with all my bookmarks are at my ex's.... I'll keep u posted. may take a few days mind..



cheers Thumbs Up
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

element
World Chat Champion



Joined: 23 Jan 2006
Karma :
PostPosted: 18:26 - 13 Apr 2008    Post subject: Reply with quote
just got all my bookmarks. zipped em up and emailed em to myself so i can have a sift through them when i get home... Ive still got plenty of links for DT125RE parts aswell so its all good Thumbs Up
____________________
04' DT125RE (run-a-bout) // 89' DT125R (rebuilt + supermoto conversion)
SPARES FOR SALE. 2RK TZR // 82 DR125 // DT125R/E .... PM ME...
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 18 years, 218 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.38 - MySQL Queries: 13 - Page Size: 94.8 Kb