help needed :(

[Ad_87]

Hi guys, I feel so feckin stupid for doing his, but here it goes:

I n a rush I accidentally put the disclock on the wrong way around, so it's facing inwards, and how it's positioned I don't have great access to it.. to top it off, i've snapped 1 of the keys in the lock pissing about with it.. it's fully in so I can't use pliers.
It's a xena alarmed disclock if that's any use, any ideas guys?

cheers.

Ad.

[Itchy]

Hmm you mean those drill proof xena locks that are drill proof hack proof etc? .

if the key is snapped then surely you can just push it in a bit more and effectively use the remainant of the key to turn the lock? (if its not all the way in poke it in?).

Else you may have to take off the caliper , remove the disc , and angle grind it off,
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.

[Shaane]

Cut it off
____________________
EMRA Roadstock #92 - Paperwork Permitted.
Previous: 1992 DT125R
Current: ~ 2005 ZX6R C1H

[Ste]

Errr, now might be a good time to buy an angle grinder?

[Ariel Badger]

Lidl were doing angle grinders last weekend.
____________________
Bikers make great organ donors, get 115 on your licence today.

[G]

Can you unbolt the disc to give you better access, maybe take the wheel off too?

[Fisty]

Congratulations, you have failed.

Caliper off, wheel off, disc off.

Chop the lock off with an angle grinder, being carefull not to damage the disc.

Reasemble and remember not to do it again.
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[brucelivi]

thats a bad 1 cut the lot off or fit a new front end lol. Let us know how you get on mate.

[Ichy]

Ride it to mine and I'll do it for you.

[tutton]

Get some sort of small metal rod,
Super glue on the end of it,
Put it in the lock so its got a good contact on the key stuck in there,
wait for it to dry, either use this to remove the key out or if its strong enough cut it off.
You might have a spare who knows.
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Wafer_Thin_Ham]

[Fisty]

[Ichy]

[Charlie]

Maybe try (dunno if it will work) get a hack-saw. Un-bolt the the blade. thread that between the disk and the lock. then try and re-attach blade to saw and cut through the locking pin? The only weak bit I can see on my Xena disk lock...
____________________
Past: Honda x8rs, Honda City fly, Honda Hornet 250, Honda VFR750, Yamaha xt600e.
Current: Honda CBR929RR & Yamaha XT660Z Tenere

[Ariel Badger]

[Ichy]

No doubt on par with Nettos Slid in tomato sauce, or dare I mention the Lidl 38p licorice Allsorts? But we digress.

Aldi truely is the Mecca of the power tool junkie.

[tutton]

Seems im the only one who shops for their tools in FOCUS and B&Q damn
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Ariel Badger]