Can anyone find cheaper?

[tutton]

Well took my bike to the bike shop,
chain was feeling too tight after it was too loose.

Using the special sidestand trick looked at chain and sprokets,
and has decieded there both mullered and theres a tight spot in the chain.

Cheapest i can find a set is 39.99 plus around 8 pounds delivery at This place

Bikes a Peugeot XP6 S
https://www.huntlymotorcycles.co.uk/mediac/400_0/media/BIKES_REVIEWS_PEUGEOT_XPS$2520SUPERMOTARD_Peugeot-XPS644jpgjpg.jpg

can anyone find any cheaper?
and how reasonable is 15 quid to fit both sprokets and chain?
cheers
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Wafer_Thin_Ham]

I guess that bike is a 125 tops, so will be a split link chain. It's something you could probably do yourself with a workshop manual and a torque wrench in about an hour or so.

£15 seems good if you're feeling lazy though.

I wish my C&S were £39.99!
____________________
My Flickr

[Mr.Everready]

Can't get your link to work.

As said, £15 is a good price to get the job done.
____________________
the undemocratically unelected mod of the Scottish section

[tutton]

50cc chap,
The sprokets are knackered too, so i was guessing buying a whole set and replacing whole chain would be a good measure,
Apparently the parts are hard to find pattern, apparently the genuine pug ones are total wank
Said he paid 12 pound for a pattern sprocket for his 1000 gsxr
and fixed that link now.
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Wafer_Thin_Ham]

[Wafer_Thin_Ham]

Link's working now, and that C&S looks fit for the job.
____________________
My Flickr

[tutton]

Bloke said his patten parts are fine.
and ok, is that the cheapest i can hope to get?
and the pug genuine ones are about 10 pound more
patten or genuine(french quality)
lol
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Wafer_Thin_Ham]

[map]

This Peugeot Parts Place has drive sprocket for £5.10.

Don't know about the other, maybe worth contacting them

HTH
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger?

[tutton]

Brilliant,
Emailing them now,
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Jaloopa]

https://mandp.co.uk/productInfo.aspx?catRef=548434

£17, and their postage is pretty cheap too.

I managed to change my chain and sprockets without too much hassle. Bits of it are a 2 man job, and you'll need some way to keep the bike off the floor if you don't have a center stand or paddock stand. I used a load of concrete blocks piled under the engine.
____________________
mattsprattuk wrote: but at least the lifan could do like 104mph in 3rd gear

[tutton]

Pug parts place
only do the drive sproket unfortunatly i need both im told.

jaloopa, Looks good emailed them asking if they can match my current ones, id rather save some by shopping around for the sprockets and just pay the 15 quid and avoid the hastle of doing it myself as im lazy like that
Cheers!
Any other suggestions welcome.
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[UnknownStuntm...]

out of interest where did you take it? And DON'T you fecking DARE say that Reliant dealer.

[tutton]

Reliant dealer?
where the feck is that.

Took it to D&P Tyre tech
friendly with the chap has been doing mine and mates dirtbike wheels for around 2 years on and off when we fuck em up.

Patt watts is a twat.
Generation are too lazy and cba with the work,
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30