|
|
| Author |
Message |
| Faldo |
This post is not being displayed .
|
Faldo
World Chat Champion
Joined: 05 Aug 2007
Karma :  
|
 Posted: 14:17 - 24 Jun 2008  Post subject: Any Ideas Where To Get Jack Up Bones For ZX7R? |
 |
|
I think the title says it all really!
There used to be someone selling them on Fleabay but can't find any now, and I don't want to make my own, so any ideas welcome.
____________________
Current: ZZR1400
Previous: ZXR 400 L9, ZX-7R P5, ZZR 400, ZX-7R P6, Bandit 600, GSXR 750 Slingshot, DRZ400, DR650, ZX10R C1H, ZXR 750 L1, ZXR 750 L3, '99 ZX7R P4, KTM 300 EXC, ZX-9R E1, TDM850 |
|
| Back to top |
  |
You must be logged in to rate posts |
|
 |
| Whosthedaddy |
This post is not being displayed .
|
Whosthedaddy
Super Spammer
Joined: 11 Dec 2005
Karma : 
|
Posted: 18:10 - 24 Jun 2008  Post subject: |
|
|
I was looking at this site many a moon ago when after some for the FZR, went for a cheaper one on eBay that actually lowered the seat as not correct length, too short!
https://www.bikefarmmv.de/EN/tail-riser/zeige_artikel.php?fid=200213
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy |
|
| Back to top |
| |
You must be logged in to rate posts |
|
|
| Pete. |
This post is not being displayed .
|
Pete.
Super Spammer
Joined: 22 Aug 2006
Karma : 
|
Posted: 19:26 - 24 Jun 2008  Post subject: |
|
|
You could just make some. What some people do is support the rear of the bike and release one end of the stock bones. Now set your required seat height and measure the distance between the hole in the stock bone and the hole it's supposed to line up with. you now have your required hole pitch so get some flat bar and drill the holes in the appropriate place.
As a rough guide figure on 5mm movement on the hole to be about 15mm difference in height, or thereabouts.
____________________
a.k.a 'Geri'
132.9mph off and walked away. Gear is good, gear is good, gear is very very good  |
|
| Back to top |
 |
You must be logged in to rate posts |
|
|
| kawakid |
This post is not being displayed .
|
kawakid
World Chat Champion
Joined: 15 Mar 2005
Karma :
|
| Posted: 23:59 - 24 Jun 2008 Post subject: |
|
|
Good find!
____________________
I've a twin and a 4. |
|
| Back to top |
| |
You must be logged in to rate posts |
|
|
| Faldo |
This post is not being displayed .
|
Faldo
World Chat Champion
Joined: 05 Aug 2007
Karma :
|
| Posted: 05:57 - 25 Jun 2008 Post subject: |
|
|
Top man WTD. 
I'm going to have a play with suspension settings this weekend and will probably order some next week.
Think I'll go for the "EXTREME" ones, which raise by 55mm. Should make the back end of my yellow bike look pretty cool.
I did toy with the idea of making my own Geri, but I fear the usual will happen, whenever I have the bright  of making my own stuff, I get the theory right but the execution seems to let me down  ! They'll only cost 30 quid delivered from Germany too.
____________________
Current: ZZR1400
Previous: ZXR 400 L9, ZX-7R P5, ZZR 400, ZX-7R P6, Bandit 600, GSXR 750 Slingshot, DRZ400, DR650, ZX10R C1H, ZXR 750 L1, ZXR 750 L3, '99 ZX7R P4, KTM 300 EXC, ZX-9R E1, TDM850 |
|
| Back to top |
| |
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 18 years, 122 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|
Help & FAQs
Search BCF
Members
Groups
Events Calendar
rating
rating