Dreaded electrics

[TAX MY BRAIN]

The problem i have is this......
Im trying to wire the fan motor and the tempature sensor back in on my gsxr 400 gk71f, i stripped it out sometime ago everything else is working fine ( lights, indicators, clocks, tail light, side stand) except the temp gauge and fan motor,


There are six wires not plugged in ......two from the fan motor, two from the sender unit on the rad and two from the wiring loom,


Would i be right in thinking that some how the temp sender and the fan are linked as there are only two wires coming from the wiring loom and not four,

Its been a long time since i stripped it out and cant remember how they go back together,

any help would be great
____________________
i also ride the local bike.............she's like a moped great fun to ride as long as your friends dont see you !!

[garyd]

Get the 2 from loom ,find which is 12volt feed,now wire this to t/stat ,out of other stat wire to fan ,out of other fan wire to remaining loom wire ,fan will now operate when t/stat says so
____________________
CRF230 all you need

[TAX MY BRAIN]

cheers gary,

all sorted thanks mate
____________________
i also ride the local bike.............she's like a moped great fun to ride as long as your friends dont see you !!