Help needed of the bolt kind.

[Damon]

Hi all,

I am in desperate need of this bolt and i cannot seem to find anything online or otherwise.

I have included a photocopy of the drawing i drew up. please can someone help my find a link or phone number of someone who has this bolt.

Thanks for everything

Damon

[Whosthedaddy]

Whats it for as it may help locate it?
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy

[Itchy]

Go to an engineering place they should be able to make one for you easy

My local engineering place Vent heat and cold roll steel rings are going to be tasked to make some paniers for me and a mounting rack also , as they are really low on work right now and take anything on gladly pretty cheap.

, the other alternative is to buy steel rods and use a tap/die set to make them yourself.
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.

[Whosthedaddy]

[kev...]

give these guys a call they will be able to help

edit this is the right link sorry

https://www.bestcoltd.co.uk/products.htm

[thefallenange...]

got to your local industrial suppliers and they might have something like it or be able to order it in.Looks like a long shoulder, any reason why the threads don't run to the end of the bolt.

Short of that find a machine shop drop it in and they'll be able to wizz that in 15 minutes tops
____________________
Past - CG125 ,KR1S, SV650s, Street Triple R - Current - Duke 390

[email protected]

[adamcpi50sx08]

theres a guy on ebay who sells just nuts and bolts and seriously he has every nut and bolt on the planet, i cant remember the seller name i will look on my account and post the seller name
____________________
CR 125 (OFFROADER) - DEP PIPE ETC
CPI 50 SX 2008 - NO MODS YET EXCEPT FROM A SET OF ACERBIS HANDGUARDS

[geordiecbrblo...]

Could a M14 x 130mm be cut down to length?

ttp://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320286809155

[pyx_e]

https://i361.photobucket.com/albums/oo60/pyx_e/A2_ScrewBolt_SHCap_M12_120.jpg
____________________
Shiney!
Kawasaki: ER5, Versys, VN900.

[daemonoid]

Come now pyx_e, stop taunting the poor lad.
____________________
current: ducati monster 750
past: hyosung gt250r, bajaj pulsar 180, hyosung gt 125 comet
@thomasgarrard | www.straitjkt.com | www.racingseven.com

[gmanxiii]

im guessing its for a bar end maybe? i took a bent one down to local bike/oddjob shop and matched up a spare was like 50p
____________________
I kills hondas

VFR400NC30 > ZZR600 > CBR600FX > CBR1000rr

[Damon]

Hi all,

its actually for work. For a cable crossover machine. It is the bolt that holds the pulley to the frame. Looked everywhere but cannot find too much.

It needs to be rated at 12.9 with a allen head (otherwise no access to turn bolt). It also cannot have thread the entire length of the bolt. It can however be slightly longer. Thanks for all your help, ive contacted the companies, just waiting for a responce.

Damon

Karma for all when i get back online a bit later

[pyx_e]

https://www.stagonset.co.uk/fasteners?cart_id=6157946_25701&prm_grp=A2_ScrewBolt_SHCap_M12&summit=M12|Socket|Head|Cap|Screws
____________________
Shiney!
Kawasaki: ER5, Versys, VN900.

[Damon]

thanks but thats a M12 bolt. i need a M14

[FZX-er]

seems like its a standard size providing its a standard pitch thread. easy to get hold of.

[FZX-er]

seems like its a standard size providing its a standard pitch thread. easy to get hold of.

[thefallenange...]

[Damon]